Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
4/25/06 AC 27-1B, Chg 2
( MANUAL IDENTIFICATION)
ATTACHMENT 4
TYPE DESIGN CHANGE
ICA RECOMMENDED PROCEDURES
(Continued)
Requirement Regulation Location
( Y ) Introduction information that includes ( Y ) an explanation of A27.3(a)(1) ATA 0
the rotorcraft’s features and ( Y ) data to the extent necessary for
maintenance and preventive maintenance.
( Y ) A description of the (N/A) rotorcraft and its systems and A27.3(a)(2) ATA 25
installations, (N/A) engines and its systems and installations,
(N/A) rotors and its systems and installations, ( Y ) appliances and
its systems and installations.
( Y ) Basic control and operating information describing ( Y A27.3(a)(3) ATA 25
) how the rotorcraft components and systems are controlled and ( Y
) how the rotorcraft components and systems are operated including
( Y ) any special procedure and limitations.
( Y ) Servicing information that covers details regarding ( Y A27.3(a)(4) ATA 12
) servicing points, (N/A) capacities of tanks, ( Y ) capacities of
reservoirs, ( Y ) types of fluids to be used, ( Y ) pressures applicable
to the various systems.
( Y ) Location of access panels for ( Y ) inspection and ( Y A27.3 (a)(4) See
) servicing. NOTE 2
( Y ) Servicing information that covers details regarding ( Y A27.3(a)(4) ATA 12
) locations of lubrication points, ( Y ) the lubricant to be used.
( Y ) Equipment required for servicing. A27.3(a)(4) ATA 12
( Y ) Tow instructions and limitations. A27.3(a)(4) ATA 9
( Y ) Mooring information A27.3(a)(4) ATA 10
(N/A) Jacking information A27.3(a)(4) N/A
(N/A) Leveling information A27.3(a)(4) N/A
( Y ) Scheduling information for each part of the ( Y ) rotorcraft A27.3(b)(1) See
that, provides the recommended periods at which they should ( Y ) NOTE 3
cleaned, ( Y ) inspected, ( Y ) adjusted, ( Y ) tested, ( Y )
lubricated and ( Y ) the work recommended at these periods.
(N/A) Scheduling information for the (N/A) rotorcraft’s engine(s) A27.3(b)(1) N/A
that provides the recommended periods at which they should be
(N/A) cleaned, (N/A) inspected, (N/A) adjusted, (N/A) tested,
(N/A) lubricated and (N/A) the work recommended at these periods.
NOTE: This information may be in the FAA/AUTHORITY accepted
engine ICA.
Figure 2 (continued)
REVISION: (DATE)
Revision 4 Page 6
Page Apdx A - 67
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.