Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
4/25/06 AC 27-1B, Chg 2
(MANUAL IDENTIFICATION)
ATTACHMENT 2
INSTRUCTIONS FOR CONTINUED AIRWORTHINESS
PROCEDURES INFORMATION
(Continued)
13. Develop order and method procedures for making the repair. Identify the type of
damage and limits that can be repaired and specify inspection required before the repair can be
made. Specify special process(es) to be used to make the repair and acceptable repair materials.
14. Develop order and method procedures for applying protective treatment to the
appliance, including any special process(es) to be used during treatment. Specify the type of
protective material to be used.
15. Develop order and method procedures for installation of the appliance. Specify special
procedure and process(es) to be used. Specify measurements, clearances, and torques for the
appliance being installed.
16. Develop order and method procedures for servicing, lubricating, or draining the
appliance. Specify the type of servicing material, the quantity, and limits. Specify safety
equipment and safety precautions.
17. Develop order and method procedures for testing the part. Specify the type of test and
equipment required for the test, including location of connection points. Specify test standards
and limits for the appliance being tested. Describe what action should be taken when the test
results are unacceptable.
18. Develop order and method procedures for troubleshooting the appliance. Provide
troubleshooting information, problem malfunction, and remedial actions.
19. Develop order and method procedures for adjusting the appliance. Specify location for
adjusting, and the standards and limits of adjustments. Specify special tool(s) or equipment
required to make adjustments. Describe actions to be taken when adjustment is past limits.
Provide safety precautions and safety equipment required for adjustment.
20. Develop order and method for safetying or securing the appliances and specify the
types of safetying devices.
REVISION: (DATE)
Revision 3 Page 2
Page Apdx A - 59
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.