FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-55

PDF page 1158 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1158
AC 27-1B · Apdx A-55Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

4/25/06                                          AC 27-1B, Chg 2

                                    (MANUAL IDENTIFICATION)
                     ATTACHMENT 1
                    PART 27 REQUIREMENTS

                         Requirement                             Regulation   Location
(    ) Information describing the order and method of                 (    A27.3(b)(3)
) removing and (    ) replacing rotor(s) with any necessary
precautions to be taken.
(    ) Information describing the order and method of                (    A27.3(b)(3)
) removing and (    ) replacing parts with any necessary precautions
to be taken.
(    ) Other general procedural instructions including                (    A27.3(b)(4)
) storage limitations and procedures for (    ) testing system during
ground running, (    ) making symmetry checks,             (    )
weighing and determining the center of gravity, (    ) lifting, and (
) shoring.
(    ) Diagrams of structural access plates and information needed to  A27.3(c)
gain access for inspections when access plates are not provided.
(    ) Details for the application of special inspection techniques       A27.3(d)
including radiographic and ultrasonic testing where such processes
are specified.
(    ) Information needed to apply projective treatment to structure     A27.3(e)
after inspection.
(    ) All data relative to structural fasteners such as                 (     A27.3(f)
) identification, (    ) discarded recommendations, and        (    )
torque values.
(    ) A list of special tools needed                                   A27.3(g)
(    ) The Instructions for Continued Airworthiness must contain a    A27.4
section, titled Airworthiness Limitations that is                      (    )
segregated and (    ) clearly distinguishable from the rest of the
document. NOTE: The Airworthiness Limitations Section in the
applicant’s ICA will be evaluated by the appropriate
FAA/AUTHORTY.
(    ) The Airworthiness Limitations Section must set forth each      A27.4
mandatory replacement time, structural inspection procedure
approved under § 27.571.
(    ) If the Instructions for Continued Airworthiness consist of       A27.4
multiple documents, the Airworthiness Limitations Section required
by this paragraph must include in the principal manual.
Figure 1 (continued)



REVISION:                                                   (DATE)
Revision 4                                                         Page 4


                                                                  Page Apdx A - 55

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →