FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-54

PDF page 1157 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1157
AC 27-1B · Apdx A-54Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                                  2/12/03

                                    (MANUAL IDENTIFICATION)
                     ATTACHMENT 1
                    PART 27 REQUIREMENTS

                         Requirement                             Regulation   Location
(    ) Scheduling information for the (    ) rotorcraft’s rotor(s) that    A27.3(b)(1)
provides the recommended periods at which they should be
(    ) cleaned, (    ) inspected, (    ) adjusted, (    ) tested,
(    ) lubricated, and (    ) the work recommended at these periods.
(    ) Scheduling information for the (    ) rotorcraft’s accessories     A27.3(b)(1)
that provides the recommended periods at which they should be (    )
cleaned, (    ) inspected, (    ) adjusted, (    ) tested, (    ) lubricated,
and (    ) the work recommended at these periods.
(    ) Scheduling information for the (    ) rotorcraft’s instruments     A27.3(b)(1)
that provides the recommended periods at which they should be (    )
cleaned, (    ) inspected, (    ) adjusted, (    ) tested, (    ) lubricated,
and (    ) the work recommended at these periods.
(    ) Scheduling information for the (    ) rotorcraft’s equipment      A27.3(b)(1)
that provides the recommended periods at which they should     (
) cleaned, (    ) inspected, (    ) adjusted, (    ) tested, (    )
lubricated, and (    ) the work recommended at these periods.
(    ) The degree of inspection for each part of the (    ) rotorcraft      A27.3(b)(1)
and its (    ) engine(s), (    ) auxiliary power unit, (    ) rotor(s),
(    ) accessories, (    ) Instruments, and (    ) equipment.
(    ) The applicable wear tolerances                                 A27.3(b)(1)
The applicant may refer to an (   )accessory, (    ) instrument, or      A27.3(b)(1)
(    ) equipment manufacturer as the source of this information if
the applicant shows (    ) that the item has an exceptionally high
degree of complexity requiring specialized maintenance techniques,
test equipment, or expertise.
(    ) The recommended overhaul periods and necessary cross         A27.3(b)(1)
references to the Airworthiness Limitation Section.
(    ) An inspection program that includes (    ) the frequency and (    A27.3(b)(1)
) extent of the inspection necessary to provide for the continued
airworthiness of the rotorcraft.
(    ) Troubleshooting information describing (    ) problem           A27.3(b)(2)
malfunctions, (    ) how to recognize those malfunctions, and     (
) the remedial action for those malfunctions.
(    ) Information describing the order and method of                 (   A27.3(b)(3)
) removing and (    ) replacing engine(s) with any necessary
precautions to be taken.
Figure 1 (continued)

REVISION:                                                     (DATE)
Revision 4                                                            Page 3


Page Apdx A - 54

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →