FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-27

PDF page 1130 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1130
AC 27-1B · Apdx A-27Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 6
                    DIMENSIONS AND ACCESS

1. AN EXPLANATION OF THE ROTORCRAFT FEATURES
   a.    The ICA must include the features of the rotorcraft.
Reference Appendix A, A27.3 (a)(1).

   b.   The dimensions are part of the rotorcraft’s features and normally include:
      (1) Principal dimensions of the rotorcraft.
      (2) Dimensions of the rotorcraft.
         (a) Exterior dimensions.
         (b) Interior dimensions.
      (3) Layout of the rotorcraft.
      (4) Divisions of the structure - zones and zonal groups.
      (5) Airframe reference lines.
         (a) Stations lines.
         (b) Water Lines.
          (c) Buttocks Lines.

2. LOCATION OF ACCESS PANELS
   a. The ICA must include the location of access panels for inspection and servicing.
Reference Appendix A, A27.3 (a)(4).

   b. Access information normally includes:
      (1) Descriptions of access panel, plates, doors and cowlings.
      (2) Location of access panels plates, doors, and cowlings.
      (3) Procedure for removing and installing access panels and doors.
      (4) Figures showing dimensions and locations of access panels and doors.

   c. To prevent removal of all access panels, plates, doors, and cowling for each inspection, the
access panels, plates, doors, and cowling should be identified. Only those identified would need
to be removed for each inspection. The use of a figure to identify those access panels, plates,
doors, and cowling is recommended.

3. DIAGRAM OF STRUCTURAL ACCESS PLATES AND INFORMATION NEEDED
TO GAIN ACCESS FOR INSPECTION WHEN ACCESS PLATES ARE NOT
PROVIDED.
   a. The ICA must include structural access plate information.
Reference Appendix A, A27.3 (c).

   b.  If applicable, the ICA should identify those structural access plates.


REVISION:                                         (PAGE NUMBER)
Revision 3                                                        06-00-00  Page 1


                                                                  Page Apdx A - 27

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →