Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
7/25/2014 AC 27-1B, Chg 6
CHAPTER 3
AIRWORTHINESS STANDARDS
TRANSPORT CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 23 AUTOMATIC FLIGHT GUIDANCE AND CONTROL SYSTEMS
(AFGCS) INSTALLATION IN PART 27 ROTORCRAFT.
a. Purpose.
(1) This guidance recognizes the following Radio Technical Commission for
Aeronautics (RTCA) documents as acceptable for showing compliance with regulatory
requirements for the installation of automatic flight control guidance and control systems
(AFGCS).
(i) RTCA Document DO-325, Minimum Operational Performance Standards
(MOPS) for Automatic Flight Guidance and Control Systems and Equipment, issued
December 8, 2010.
(ii) RTCA Document DO-336, Guidance for Certification of Installed Automatic
Flight Guidance and Control Systems (AFGCS) for Part 27/29 Rotorcraft, issued March
21, 2012.
(2) RTCA Document DO-325 contains the minimum operational performance
standards (MOPS) for AFGCS equipment, included by reference in TSO-C198. DO-336
provides guidance on obtaining installation approval of AFGCS in rotorcraft. It invokes
parts of DO-325 as performance standards applicable for installation of AFGCS
equipment in rotorcraft. It provides guidance on conducting a safety assessment.
Lastly, DO-336 lists the regulations applicable to an AFGCS installation and acceptable
methods of compliance to those regulations.
(3) This guidance is not mandatory. It describes an acceptable means, but not
the only means, for showing compliance with applicable 14 CFR regulations. Following
this guidance alone does not guarantee acceptance by the FAA. Depending on
circumstances, we may require additional substantiation or design changes as a basis
for finding compliance.
b. Background. Technical standard order (TSO) TSO-C198, Automatic Flight
Guidance and Control system (AFGCS) Equipment, replaced TSO-C9c, Automatic
Pilots, and TSO-C52b, Flight Director Equipment. TSO-C198 identifies a new
comprehensive minimum operation performance standard (MOPS) under RTCA
Document DO-325 and qualifications for software and airborne electronic hardware.
Page MG 23 – 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.