Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
3/31/2014 AC 27-1B, Chg 4
CHAPTER 3
AIRWORTHINESS STANDARDS
NORMAL CATEGORY ROTORCRAFT
MISCELLANEOUS GUIDANCE (MG)
AC 27 MG 22 ROTORCRAFT ONE ENGINE INOPERATIVE (OEI) TRAINING
MODE.
a. Purpose. This guidance provides a means to achieve airworthiness approval for
OEI training mode to be installed on rotorcraft. These devices have been mainly
designed to allow category A training without using the OEI ratings thus eliminating the
need of extra maintenance for the engines and drive system. This guidance does not
change the regulatory requirements and does not authorize changes in, or deviations
from, regulatory requirements. These guidelines are developed for category A
rotorcraft. If an applicant would like to develop such a system for category B rotorcraft,
additional requirements may be applied by the certification authority.
b. References and Related Documents.
(1) 14 CFR parts 21, 27, 29, 33, and corresponding European Requirements
(Certification Specifications) part 21, CS-29, CS-E.
(2) ACs 27-1B and 29-2C.
c. Background. Different types of OEI training modes and similar systems have
been developed and are likely to be developed in the future. Their intent was to provide
operators with a means to simulate OEI conditions for training purposes without using
the engine and drive system OEI ratings. This type of installation requires an
appropriate level of qualification, commensurate to the criticality of the most severe
effects on the rotorcraft.
d. Definitions. OEI Training mode: for the purpose of this guidance material, a
system or device designed to train the flightcrew by simulating, with an appropriate
weight, the OEI conditions, reducing the power of the engines without accessing the
actual OEI engine and drive system ratings. This includes cockpit controls and display
indications necessary for the flightcrew to safely operate the system or device.
e. Certification Approach. There are different basic aspects to consider when
approaching an OEI training mode that should be addressed in the proposed
certification plan.
(1) System purpose definition. The certification process should begin with a clear
declaration of the objective of the OEI training mode. Past experiences have shown
that these type of systems have been mainly designed to allow operators to train their
flightcrew on category A procedures without cutting one engine to idle through the
Page MG 22 - 1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.