Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 7 2/4/2016
Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
failure condition description but in the systems description or assumptions section.
ATA 73-00-00 - ENGINE FUEL AND CONTROL
Failure Phase of Effect of the Failure Classification Notes Supporting Verification Function ATA Condition Operation on the Aircraft, Crew of the FC (assumptions) Material Method Description (FC) and Occupants
7331 Fuel Flow Loss of fuel ALL The reduction in safety Analysis
Indicating flow. margins and functional
capability in the system
may prohibit continued
safe flight and landing.
Malfunction ALL The failure can delay Analysis
and loss of crew action long
fuel flow enough to prevent
indication. continued safe flight
and landing.
Misleading ALL A large reduction in Analysis
fuel flow safety margins or
alert failed. functional capabilities.
7332 Fuel Pressure Loss of fuel ALL The reduction in safety Analysis
Indicating pressure. margins and functional
capability in the system
may prohibit continued
safe flight and landing.
Malfunction ALL A combination of a Analysis
and loss of malfunction with a loss and Test
fuel of indication in the
pressure system can delay crew
indication. action long enough
causing a large
reduction in safety
margins or functional
capabilities.
Figure AC 27 MG 21-1. Generic Examples by ATA.
Page MG 21 - 38
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.