FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1067

PDF page 1067 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1067
AC 27-1B · 1067Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                                      2/4/2016

 Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
                       failure condition description but in the systems description or assumptions section.

ATA 23-00-00 - COMMUNICATIONS
                      Failure      Phase of     Effect of the Failure on    Classification  Notes         Supporting   Verification       FunctionATA                Condition    Operation   the Aircraft, Crew and    of the FC      (assumptions)  Material    Method       Description                    (FC)                    Occupants
                     Loss of            A slight reduction in                                                     Analysis and
                      primary       ALL      safety margins would                                                                                  / or test
                        radio                      occur with a loss of
                    communica­               redundancy of a required
                         tion with                   system.
               ATC and
                        other                  Crew would switch to
                           aircraft in                  secondary Comm. to
                      IFR.                        coordinate with ATC and
                                                     other aircraft.
                     Loss of            A slight reduction in                                                     Analysis and
                      primary       ALL      safety margins would                                                                                  / or test
                        radio                      occur with a loss of
                    communica­               redundancy.
                         tion with
               ATC and               Crew would switch to
                        other                      secondary Comm. to
                           aircraft in                   coordinate with ATC and
               VFR (with                   other aircraft.
                        multiple
                   comm.
                     Radios
                           installed).





                              Figure AC 27 MG 21-1. Generic Examples by ATA.

Page MG 21 - 16

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →