FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1066

PDF page 1066 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1066
AC 27-1B · 1066Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                            AC 27-1B, Chg 7

 Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
                       failure condition description but in the systems description or assumptions section.

ATA 23-00-00 - COMMUNICATIONS
                      Failure      Phase of     Effect of the Failure on    Classification  Notes         Supporting   Verification       FunctionATA                Condition    Operation   the Aircraft, Crew and    of the FC      (assumptions)  Material    Method       Description                    (FC)                    Occupants
2300  Communica   Total loss of               Aircrew workload would                                                 Analysis and
        tion System  ALL radio     ALL      increase significantly for                                                                              / or test
                    communica­                 the requirement of the
                         tion with                 crew to increase
               ATC and                  awareness for other
                        other                            aircraft.
                           aircraft
                        (IFR).                        Significant reduction in
                                                      safety margins as one
                                                        level of protection against
                                                 a collision is lost.

                                    No effect on occupants.
                       Total loss of               Aircrew workload would                                                 Analysis and
               ALL radio     ALL      slightly increase by                                                                                     / or test
                    communica­                  setting 7600 on the
                         tion with                  Transponder and changing
               ATC and                    the planned flight by
                        other                       landing at an uncontrolled
                           aircraft                         airfield or receiving light
                     (VFR).                       signals from a controlled
                                                              airfield.





                              Figure AC 27 MG 21-1. Generic Examples by ATA.

                                                                               Page MG 21 - 15

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →