Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
(3) The set of tables in Figure AC 27 MG 21-1 provides examples of a format for
the system level FHA as identified in the reference ARPs. Guidance is also included for
typical entries for the columns with a short description of each as follows:
(i) ATA. This column was taken from the “Joint Aircraft System/Component
(JASC) Code Table” document to provide a complete list of systems defined on an
aircraft. It is not a typical column entry for an FHA and should not be considered as
such. However, it provides a systematic approach to identify various aircraft systems.
(ii) Function Description. A concise description of the sub-functions for each
top level system. For example, the oil system is made up of sub-functions such as oil
pressure, oil temperature, and oil quantity.
(iii) Failure Condition (FC). Typical entries in this column include “Loss of …”,
“Unannunciated loss of …”, “Misleading data to the flight crew …”, “Malfunction of …”,
along with environmental conditions (e.g., day and night VFR, IFR, Icing). This guidance
encourages applicants to use this verbiage for standardization purposes and to
minimize confusion in the review of FHAs.
(iv) Phase of Operation. In this column, the typical entries are Hover, Takeoff,
Climb, Cruise, Descent, Approach/Landing, or any combination as appropriate.
(v) Effect of the Failure on the Aircraft, Crew and Occupants. Describe the
effects of the failure on the aircraft, aircraft system, flightcrew workload, and occupant
safety and comfort. The inclusion of mitigating design features within this column entry
is not appropriate and should not be included. Instead, any mitigation required to meet
the failure classification should be included in the System Safety Assessment. Each
type of effect, not only the effect on flight crew workload, should be analyzed. The
effect on the degradation of the system should not be overlooked, as this can result in a
higher classification.
(vi) Classification of the FC. This is typically the most challenging entry in the
process since it is completely qualitative and requires input from multiple subject matter
experts. It requires the participation of various disciplines such as safety analysts,
design engineers, engineers responsible for software or complex hardware, human
factors specialists, and flight test personnel. After the applicant has determined the
classification levels, the results must have concurrence from the certification authority.
This may require lengthy discussions and should occur very early in the certification
process.
(A) Some appropriate entries are no effect (NE), minor (MIN), major
(MAJ), hazardous (HAZ) or catastrophic (CAT). The definition for each can be found in
section 27.1309 of this AC. Note that this column in Figure AC 27 MG 21-1 was
intentionally left blank because of the variation of appropriate classifications for a similar
failure condition.
Page MG 21 - 3