FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1028

PDF page 1028 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1028
AC 27-1B · 1028Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016


                    (ii) IFR. Regulations for rotorcraft certificated for IFR operations are found in Appendix B to
part 27.

                     (iii) Field-Loadable Software (FLS) as part of the TC/STC/ASC/ASTC installation. FLS is
software that can be loaded without removal of the equipment from the rotorcraft installation. FLS can
refer to either executable code or data. FLS might also include software loaded into a line replaceable
unit (LRU) or hardware element at a repair station or shop. When obtaining certification approval for
utilization of the FLS capability, refer to the guidance in FAA Order 8110.49.

              (iv) Navigation Database Qualification. For area navigation equipment, the navigation
database is an essential component of the ability of the equipment to perform its intended function.
RTCA Document DO-200A, Standards for Processing Aeronautical Data, contains guidelines pertaining
to the navigation database. Consider obtaining a Type 2 Letter of Authorization for databases used for
Localizer Performance with Vertical Guidance in addition to the required documentation. See
AC 20-153A for additional information.

         (4) Environmental qualification. EDS displays should meet the appropriate RTCA Document DO­
160G environmental qualifications for rotorcraft. Rotorcraft environments can be more hostile than fixed-
wing environments. Give special attention to the temperature and vibration qualifications. See section
27.1309 of this AC for more guidance.

                  (i) Cooling.

                (A) Perform cooling evaluations for the installed components.

                (B) Temperature Survey to Determine Proper Cooling of EDS Components.

                      (1) Equipment Requiring Cooling Test. As with any avionics equipment, good
engineering judgment may deem that all components of the EDS should have an in-flight temperature
survey performed to ascertain that the thermal environmental tolerance of the system components is not
exceeded. Usually, the following general guidelines may be used to aid in determining when an in-flight
temperature survey is warranted.

                                     (i) Equipment specified by the manufacturer to require forced air cooling (by an
airframe-mounted system) usually requires a temperature survey.

                                       (ii) Equipment that is not specified as requiring forced air-cooling may usually
have its critical thermal environment substantiated by laboratory testing.

                      (2) Temperature Survey Testing. The temperature tests for the EDS units should
consist of a short-term test of approximately 30 minutes, which accounts for a rotorcraft that has
heat-soaked on the ramp. A factor of 25° F should be added to the maximum corrected temperature to
account for “greenhouse effect.” A long-term test should be accomplished at various altitudes and limiting
(low and high) airspeeds.  All avionic equipment should be turned on during the long-term tests, and the
cockpit panel lights should be operated at full intensity. The environmental control unit or air-conditioning
system should not be operated during the short-term and long-term tests; however, any windows or
vents, which are part of the basic TC of the rotorcraft, may be utilized to ventilate the pilot’s stations
during the long-term test. Both of these tests should be corrected to the maximum temperature for which
the rotorcraft is certificated (maximum outside air temperature) and a standard lapse rate for altitude (i.e.,
3.6° F/1,000 feet), as specified in this guidance (refer to section 27.1309 of this AC). This lapse rate
should be applied regardless of the hot day sea level temperature the applicant chooses to certificate for
operation.  If an airframe cooling system is necessary to keep the display units within acceptable
temperature limits, then the pilot(s) must be made aware of a failure or malfunction of this required
cooling system. Some type of cockpit visual annunciation with the capability to perform a preflight test is
usually utilized to fulfill this requirement.



Page MG 19 -26

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →