FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1016

PDF page 1016 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1016
AC 27-1B · 1016Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                       2/4/2016



                                 LT
      Horizontal                                             Vertical
                             30°
                                                                                                                                                \
                                     C/L                                                  Horiz
                             30°                                           15 0         0

                                                          NOM
                          RT
                                                    ON

                 Figure AC 27 MG 19-2 Secondary Field of View


         (4) System.

                  (i) Electrical system information required by § 27.1351 and other system information, like
integrated caution and warning messaging that may be included in an EICAS display, may also be
displayed in the secondary field of view.

                    (ii) EDSs provide the ability to present system information on separate pages of a display.
System architecture should not allow deselecting of the PFD, thereby not allowing access to system
pages on MFDs.

                     (iii) The EDS design should inhibit access to configuration and maintenance pages in flight.
However, pilots should have access to all information they need to perform their normal and any non-
normal procedures.

                (iv) The EDS design and installation should inhibit any pilot or manually initiated built-in-test
of the EDS in-flight.

    d. Display of Information.

         (1) Format.

                  (i) See SAE ARP 4102-7 for examples of display formats.  If new or novel formats are
developed, coordinate with the certificating authority early in the certification project. Issue papers and,
possibly, equivalent level of safety findings may be required.

                    (ii) Information format should allow the pilot quick access to the information presented without
confusion or concentration. The format of the information is influenced by the type of information it should
relay to the pilot.

                (A) There needs to be graphical display of parameters for information containing rate or
that can be dynamic in nature. Additionally, graphical display of parameters provides both discrete and
spatial information to the pilot.  It shows the pilot where the parameter is relative to limits as well as the
specific value. Additionally, graphical displays allow the pilot to see changes spatially, as opposed to
relying on remembering a numerical value and comparing it to the present numerical value.



Page MG 19 -14

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →