Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/27/2014 AC 27-1B, Chg 4
(iii) Reduced protection mode must not be selected when operating under IMC
conditions except as required when performing offshore platform IFR approach
procedures or other special IFR procedures.
(2) Operational Considerations for Normal and Abnormal Procedures. In addition
to the HTAWS operational procedures, consider the following:
(i) Terrain or Obstacle Caution Alert. When this alert occurs, verify the
rotorcraft flight path and correct it, if required.
(ii) Terrain or Obstacle Awareness Warning Alert. When this alert occurs,
immediately initiate a maneuver that will provide maximum terrain or obstacle
clearance, until all warning alerts cease.
(iii) Inhibit. For those installations that include the ability to inhibit all or some of
the HTAWS audio alerts, the RFM (or RFMS) should address:
(A) When should the audio inhibit function be used?
(B) What alerts are inhibited?
(C) How long the alerts are inhibited?
(D) How to re-establish the alerts?
l. Instructions for Continued Airworthiness. ICAs are required by 14 CFR 27.1529,
as appropriate and in accordance with part 27 Appendix A. In addition to Appendix A
requirements, the applicant should indicate when and how the terrain and obstacle
databases need to be updated.
Page MG 18 - 13
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.