Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 4 2/27/2014
aspects for certification of HTAWS installations that are discussed throughout this
document: equipment qualification, installation, system performance validation, testing
considerations, and instructions for continued airworthiness (ICA).
(2) AC 27-1 provides general guidance for certification and compliance of systems
and equipment installation on part 27 rotorcraft. TSO-C194 specifies HTAWS
equipment requirements and prescribes, by reference to RTCA specification DO-309,
the minimum performance standards that a HTAWS must meet for approval. RTCA
DO-309 defines specific Minimum Operational Performance Standards (MOPS) for
HTAWS equipment. Compliance with RTCA DO-309 provides a method of compliance
for qualification of HTAWS equipment. A method of compliance other than described in
this AC may be used provided it is determined to be acceptable to the Administrator.
(3) HTAWS required by operational regulation must comply with TSO-C194 and
should be installed in accordance with this AC or other methods acceptable to the
Administrator. Terrain and obstacle warning systems that do not comply with TSO
C194 and are not installed according to this AC or other method acceptable to the
Administrator may be installed as non-required equipment but may not be identified as
HTAWS. The certification data, including the rotorcraft flight manual supplement
(RFMS) and ICA, must state that the installed system does not comply with any
operational regulation that requires HTAWS, and may require a placard.
c. Related Regulations and Documents.
(1) Regulation Sections:
Section Title
§ 27.1301 Function and installation.
§ 27.1303 Flight and navigation instruments.
§ 27.1309 Equipment, systems, and installations.
§ 27.1316 Electrical and electronic system lightning protection.
§ 27.1317 High-intensity Radiated Field (HIRF) Protection.
§ 27.1321 Arrangement and visibility.
§ 27.1322 Warning, caution, and advisory lights.
§ 27.1351 General. [Electrical Systems and Equipment]
§ 27.1357 Circuit protective devices.
§ 27.1381 Instrument lights.
§ 27.1459 Flight data recorders.
§ 27.1529 Instructions for Continued Airworthiness.
§ 27.1541 General. [Markings and Placards]
General. [Rotorcraft Flight Manual and Approved § 27.1581 Manual Material]
§ 27.1585 Operating procedures.
Part 91 General Operating and Flight Rules.
Page MG 18 - 2
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.