FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 926

PDF page 926 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 926
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 1                                                           2/12/03

   FIGURE AC 27.MG 11-9. EXAMPLE OF TWIN TURBINE USAGE SPECTRUM
Notes:
1.  Altitude, temperature, center of gravity, and weight variations may be appropriate where justified by service data; otherwise the worst case
    must be assumed throughout.
2.  This spectrum is an example only; all probable types of operation must be accounted for unless prohibited--see Section 3.
              CONDITION           % of time      Nb per hour
 ON GROUND inc START UP                                          3.5                5
 TAXIING                                                      3.5

 APPROACH                                                   5                2
 NORMAL                                                      3.5
 UNDER HEAVY SLOPE                                    0.75
 FLARE                                                   0.375              1
 QUICK-STOP                                             0.375              1
                                                                                                                                         Dur. 14 (s)
 SPOT-TURN                                                  1                5
 30°/S/NORM (STOP)/RIGHT                                 0.32                1.6            Yaw speed rep.                  Stop rep.
 30°/S/NORM (STOP)/LEFT                                  0.32                1.6              80.00% 30°                80.00% normal
 30°/S/MAX (STOP)/RIGHT                                  0.08                0.4              15.00% 45°                20.00% max
 30°/S/MAX (STOP)/LEFT                                    0.08                0.4               5.00% max
 45°/S/NORM (STOP)/RIGHT                                 0.06                0.3
 45°/S/NORM (STOP)/LEFT                                  0.06                0.3
 45°/S/MAX (STOP)/RIGHT                                 0.015              0.075
 45°/S/MAX (STOP)/LEFT                                  0.015              0.075
 MAX/NORM (STOP)/RIGHT                                0.02                0.1
 MAX/NORM(STOP)/LEFT                                  0.02                0.1
 MAX/MAX (STOP)/RIGHT                                0.005              0.025
 MAX/MAX (STOP)/LEFT                                  0.005              0.025
                                                                                                                                          Dur. 7.2 (s)
 LANDING                                                             1.5                5
 NORMAL                                                 1.482              5.94             1/20 hours slope 8°
 ON SLOPE/8DEG/RIGHT                                 0.0043            0.0145          1/100 hours slope 10°
 ON SLOPE/8DEG/LEFT                                  0.0043            0.0145
 8DEG/NOSE-UP                                         0.0038            0.0125
 8DEG/NOVE-DOWN                                     0.0043            0.0145
 ON SLOPE/10DEG/NOSE-UP                             0.0006             0.002
 COMB.SLOPE                                           0.0006             0.002
                                                                                                                                          Dur. 11 (s)
 AUTOROTATION                                             1                1          Speed rep.             RPM rep.
 VERTICAL                                                 0.05               0.05              5.00% 70Kts              10.00% Mini
 40 KTS                                                        0.2                 0.2              20.00% 70Kts              50.00% Nomi
 70 KTS                                                        0.3                 0.3              30.00% 70Kts              36.00% Maxi
 120 KTS                                                    0.25               0.25             25.00% 120Kts              4.00% Maxi.trans
 135 KTS                                                    0.15               0.15             15.00% 135Kts
 VNE                                                         0.05               0.05              5.00% VNE
                                                                                                                                          Dur. 36 (s)
 TAKE OFF                                                            1.5                5                                                Dur. 11 (s)
 NORMAL                                               0.8892             2.964             60.00% Normal
 QUICK                                                  0.5928             1.976             40.00% Quick
 ON SLOPE/8DEG/RIGHT                                 0.0043            0.0145            1/20 hours slope 8°
 ON SLOPE/8DEG/LEFT                                  0.0043            0.0145          1/100 hours slope 10°
 ON SLOPE/8DEG/NOSE-UP                              0.0038            0.0125
 ON SLOPE/8DEG/NOVE-DOWN                          0.0043            0.0145
 ON SLOPE/10DEG/NOSE-UP                             0.0006             0.002
 COMB.SLOPE                                           0.0006             0.002

 DESCENT                                                             1.5                2
 PARTIAL POWER/STD/STD                                0.96               1.28                Speed rep.              Side slip PP values rep.
 PARTIAL POWER/5 DEG/RIGHT                          0.072              0.096             80.00% Partial power        60.00% 5°
 PARTIAL POWER/5 DEG/LEFT                            0.072              0.096             20.00% VNE               30.00% 10°
 PARTIAL POWER/10 DEG/RIGHT                         0.036              0.048                                       8.00% 15°
 PARTIAL POWER/10 DEG/LEFT                           0.036              0.048                Side slip rep.               2.00% 20°
 PARTIAL POWER/15 DEG/RIGHT                        0.0096            0.0128            80.00% Without
 PARTIAL POWER/15 DEG/LEFT                          0.0096            0.0128            20.00% with              Side slip VNE values rep.
 PARTIAL POWER/20 DEG/RIGHT                        0.0024            0.0032                                      90.00% 5°
 PARTIAL POWER/20 DEG/LEFT                          0.0024            0.0032                                      10.00% 10°
 VNE AT MCP/STD/STD                                      0.24               0.32
 VNE AT MCP/5 DEG/RIGHT                                0.027              0.036
 VNE AT MCP/5 DEG/LEFT                                 0.027              0.036
 VNE AT MCP/10 DEG/RIGHT                               0.003              0.004
 VNE AT MCP/10 DEG/LEFT                                0.003              0.004

Page MG 11 - 24

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →