Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
9/30/99 AC 27-1B
Section 3 - Emergency and Malfunction Procedures:
a. Introduction.
This paragraph would include any introductory type information (i.e., definitions
of terms used and any other information the manufacturer deemed appropriate).
b. Powerplant Failures.
This paragraph would include any information relative to engine, fuel control, or
any other powerplant related emergency or malfunction.
c. Drive System Failures.
This paragraph would include recommendations and procedures relative to any
drive system failure and/or malfunction.
d. System Failures.
This paragraph would include procedures and recommendations relative to any
system failure and/or malfunction (i.e., electrical, hydraulic, and augmented flight control
systems).
e. Fire.
This paragraph would include procedures to be followed in the event that
engine, cabin, baggage compartment fire or smoke is detected.
f. Emergency Egress.
This paragraph would include emergency evacuation procedures for both
the flightcrew and the passengers.
Section 4 - Performance Data:
a. Power Assurance.
This section would include all information relative to the power assurance
checks.
b. Hover Information.
This paragraph would include all information relative to hover performance (i.e.,
hover ceiling IGE and OGE for single and/or multiengine operation). Any relative wind
effects may also be included.
Page G - 39
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.