Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B,6/23/23
AC 27.1555A. § 27.1555 (AMENDMENT 27-51) CONTROL MARKINGS.
a. Explanation. Amendment 27-51 changed the requirements for marking the
usable fuel capacity for designs that have no selector controls. The previous
requirement for marking the usable fuel capacity near the fuel quantity indicator is not
practical for modern glass cockpit designs.
With older, electro-mechanical designs, the actual fuel capacity was not marked on the
fuel quantity gage. Traditionally these designs used a placard indicating the usable fuel
capacity next to the fuel quantity indicator to assist with flight planning and refueling.
Modern glass cockpit designs provide digital indication of the remaining usable fuel
quantity at all times while the total usable fuel capacity is typically included, although not
required, within the rotorcraft flight manual.
b. Procedures. All of the policy pertaining to this section remains in effect with the
following changes:
Section 27.1555(c)(1) requires that, for fuel systems having no selector controls, the
usable fuel capacity of the system be indicated at the fuel quantity indicator unless the
system capacity is provided by another system or equipment readily accessible to the
pilot. Such information may be provided digitally on a multi-function display (MFD)
synoptic page such as the fuel system or aircraft weight and balance page. In addition
to the digital representation, § 27.1555(c)(1)(ii) requires that the fuel system capacity be
contained in the limitations section of the rotorcraft flight manual. The digital display of
the fuel system capacity used in conjunction with the total usable fuel quantity provided
in the rotorcraft flight manual limitations section will permit the flight crew to approximate
endurance and will assist with refueling. Alternately, for designs that do not provide a
digital readout of the usable fuel capacity and include the information in the rotorcraft
flight manual, the total usable fuel capacity must be displayed at the fuel quantity
indicator in accordance with § 27.1555(c)(1).
Page G - 28.1
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.