FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page G-25.7

PDF page 745 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 745
AC 27-1B · G-25.7Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

                                             AC 27-1B, Chg 9
6/23/23

AC 27.1545A. § 27.1545 (AMENDMENT 27-51) AIRSPEED INDICATOR.


       a. Explanation. Amendment 27-51 changed the requirements for marking the
normal operating range of the airspeed indicator. Most modern glass cockpit designs
utilize the “dark, quiet cockpit” concept, which means that yellow or red is presented to
indicate abnormal conditions; green ranges are not presented. This approach has
required a finding of equivalent safety with § 27.1545(b)(4) for applicants using an
unmarked normal operating range instead of green.


           (1) Section 27.1545(b)(4) continues to allow the normal operating range to be
marked as green, but now permits an option for the normal operating range to be
unmarked.

           (2) The FAA has found it acceptable to only display the red VNE line when the
VNE is in the displayed airspeed range. Section 27.1545(b)(2) was removed and
§ 27.1545(b)(1)(iii) was added to change the presentation of VNE (power-off). In the
past, electro-mechanical gauges simultaneously displayed a red line to represent VNE
(power-on) and a red cross-hatched radial line (“barber pole”) to represent VNE (power­
off). Modern glass cockpits are able to present VNE (power-off) and VNE (power-on)
independently, which was infeasible with electro-mechanical gauges.

           (3) Another change to this airworthiness standard is that the references to
arcs and radials were removed to reflect the use of airspeed tapes. The technical
requirements have not changed.


       b. Procedures. The policy pertaining to these requirements, which is found in
section 27.1543 of this AC, remains in effect with the following changes and additions.


           (1) For compliance with §§ 27.771(a) and 27.1545(b)(4), electronic displays
that lack green ranges must include features that permit the pilot to easily interpret (by
way of glancing at the instrument) whether a parameter is in a precautionary range
(yellow) or beyond a limit (red). In addition, consistency in markings should be
maintained between the primary instrument and the standby instrument to reduce any
confusion in the cockpit when failures require using the standby instrument.

           (2) Section 27.1545(b)(1)(iii) requires that the airspeed indicator be marked
with a red indication to show both VNE (power-on) and VNE (power-off). If VNE (power-off)
is less than VNE (power-on) and both markings are simultaneously displayed, then each
depiction needs to be clearly distinguishable from the other. Some electronic displays
have represented both VNE (power-on) and VNE (power-off) with a red line. This has
been found acceptable by the FAA provided (1) both VNE depictions are not
simultaneously displayed and (2) the airspeed indicator automatically depicts the


                          Page G - 25.7

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →