FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page B-20

PDF page 72 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 72
AC 27-1B · B-20Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 4                                                     3/31/2014


                        CERTIFICATION BASIS



                                   14 CFR part 27                    CAR 6             CAR 06
                                                                                6-Amdt.
 Rqmts                 27-Amdt. 21     27-Amdt. 2       Original    6-Amdt. 7      4        Original       Original
                              1. MGW       1. MGW Sea       1. MGW     1. MGW     1. MGW    1. MGW    1. No specific
                     Sea Level     Level           Sea Level  Sea Level  Sea      Sea         wt. and alt.
  H-V                      2. Max.        2. Wt. selected     2. Wt.       2. Wt.      Level       Level       requirements.
   Ref.            OGE         by applicant at     selected     selected     2. Wt.      2. Wt.
  27.25                     wt. Lesser     lessor of:         by         by          selected    selected
  27.79                        of:              a. Max. alt. cap.   applicant    applicant   by         by
              Test       a. Max. alt.    b. 7000' Hd        at lessor     at lessor     applicant    applicant 27.1519
           Conditions   cap.                                     of:             of:         max. t.o.    at 27.1587
  6.116                     b. 7000' Hd                          a. Max.      a. Max.    and       max. t.o.
  6.741                                                                          alt. cap.       alt. cap.      ldg. alt.    and
  6.743                                                           b. 7000'      b. 7000'                   ldg. alt.
                                            Hd       Hd

                              3. H-V is       3. H-V is perf.      3. H-V is    3. H-V is    3. H-V is    3. H-V is   H-V is
                               perf. Info.       info.                 perf. info.    perf. info.    perf. info.   operating   operating
                              4. Max. alt.    4.  If H-V wt is                                                    limitation.    limitation.
                               for which       less than IGE
                     H-V is valid.    wt., wt. becomes          RFM                                                 limitation for
                                                     t.o./ldg.


AC 27-1B                   5.  If H-V is
 Section                   less than
 27.45 &           OGE wt., H­
  27.51             V wt.
                     becomes
                                    limit.
                              6. Applicant
                                  is
                       encouraged
                             to demo H-V
          Remarks    to WAT
                                  limits.
                              7. Hover
                         data may be
                     shown
                       above 7000'
                                                 if H-V & IGE
                          are demo'd
                             to 7000'.




                 FIGURE AC 27.45-1 HV Requirements





Page B - 20

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →