Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
3/31/2014 AC 27-1B, Chg 4
AC 27.1335. § 27.1335 (Amendment 27-13) FLIGHT DIRECTOR SYSTEMS.
a. Explanation. This section prescribes the accepted display criteria for a
rotorcraft three-cue flight director providing command guidance for pitch, roll, and
power. Three-cue flight directors for rotorcraft use the usual pitch and roll command
cues with the third cue displayed on the left side of the attitude director indicator (ADI).
These instruments can be used in either the two-axes or three-axes modes. In either
mode, the lateral command cue controls the roll attitude, and the vertical command cue
controls the pitch attitude. The rotorcraft attitude, controlled by the cyclic control, is
changed to satisfy the flight director commands. The third cue, when displayed,
commands collective pitch position and is used when an airspeed or pitch attitude mode
and a vertical mode (altitude hold, glide slope, etc.) are selected.
(1) The general convention for flight director design is that each command bar
is a “fly to” command. The motion of the flight director indicator is such to command a
corresponding sense of control system motion. This is true of flight director pitch and
roll commands and should hold true for additional commands such as collective pitch.
(2) Some consideration should be given to the collective, or third cue, display.
For example, if the collective symbol is selected as the fixed index, the command cue
and collective pitch control should move in opposite directions when collective pitch
changes are made. This configuration would constitute a conventional “fly to” indicator.
If the collective symbol is selected for the movable index, the direction of motion of the
collective symbol will coincide with the direction of collective pitch changes. In this case
the moving collective symbol does not comply with the “fly to” convention; however, this
configuration has been approved by the FAA with special symbology, special
background effects, and special color coding and has performed satisfactorily in service.
b. Procedures. The recommended display for a three-cue flight director
incorporates the standard pitch and roll command symbols, either pitch and roll bars or
the “V” bar display. The third cue, or collective symbol, should be located on the left
side of the ADI. The shape of the moving cue and the background display should be
unique to avoid being confused with a glide slope display or angle of attack display.
One display uses a third cue, shaped like a small handle, to aid in identifying it as the
collective pitch symbol.
(1) The color of the pitch and roll command indicators, the aircraft symbol, the
background marking of the third cue, and third cue itself, should be consistent. The
optimum color scheme uses the same color for the aircraft symbol and the collective
symbol. This is usually fire orange. The command cues including the collective cue
also should use the same color, usually yellow. The rationale for the different colors is
that the aircraft symbol and the collective symbol (the same color) are moved toward
their respective command cues. If the pitch command cue is above the center, the
aircraft symbol is raised (nose pulled up) and, if the collective command cue is above
the collective symbol, the collective pitch is raised, moving the collective symbol
towards the command cue.
Page F - 53