FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 37

PDF page 37 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 37
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27.1B, Chg 4                                                          5/1/2014


                              PCDS    personnel carrying device
IGE       in ground effect                         Systems
IIDS      integrated instrument display
         system                               PCF     post crash fire
ILS      instrument landing system        PIO        pilot induced oscillation
IMC      instrument meteorological       PSA     preliminary safety assessment
          conditions                   PSIG    pounds per square inch
INS        inertial navigation system                 gauge
ISA       international standard         QPL      qualified parts list
         atmosphere               RFM      rotorcraft flight manual
ISIS      integral spar inspection system   RFMS    rotorcraft flight manual
ITT        inter-turbine temperature                  supplement
KCAS    knots calibrated airspeed       RGL     Regulatory and Guidance
KIAS    knots indicated air speed                      Library
KTAS    knots true airspeed          RPM     revolutions per minute
LDP     landing decision point         RTCA   Radio Technical Commission
LPV      localizer performance with                 Of Aeronautics
           vertical guidance                             RVR    runway visual range
LRU      line replaceable unit                              SAE     Society of Automotive
LWC      liquid water content                                                  Engineers
MC     maximum continuous                             SAR     search and rescueMCP    maximum continuous power                              SAS       stability augmentation systemMEL    minimum equipment list                              SCAS     stability and controlMG      miscellaneous guidance                                                  augmentation systemsMGB    main gearbox                              SHP      shaft horsepowerMGT    measured gas temperature                                     S/N      stress vs. number of cyclesMGW   maximum gross weight                            SRM      structural repair manualMMEL   master minimum equipment                              SSA     system safety assessment               list
                               STC     supplemental type certificateMSL    mean sea level                               STOL    short takeoff and landingMVD    median volume diameter                             TBO     time between overhaulNASA    National Aeronautics and                               TC       type certificate        Space Administration                              TCDS    type certificate data sheet
NDI      non-destructive inspection                               TDP      takeoff decision point
NM       nautical mile                                      TIA      type inspection authorization
NPRM   notice of proposed                                      TIR      type inspection report
         rulemaking                              TOP      takeoff power
NTSB    National Transportation                               TOT      turbine outlet temperature
         Safety Board                              TSO      technical standard order
NVG     night vision goggles                                TVP      true vapor pressureNVIS     night vision imaging systems
                                 VBIM     visual blade inspection methodOAT     outside air temperature
                               VFR      visual flight rulesOEI     one engine inoperative
OGE     out of ground effect          VMC     visual meteorological
PBA      pitch bias actuator                            conditions


Page xxii

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →