FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 22

PDF page 22 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 22
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

5/1/2014                                         AC 27.1B, Chg 4


                                                              Page No.

              SUBPART D - DESIGN AND CONSTRUCTION

                           GENERAL

AC 27.601       Design............................................................................................... D-1
AC 27.602     Critical Parts...................................................................................... D-2
AC 27.603    Materials ........................................................................................... D-4
AC 27.605    Fabrication Methods.......................................................................... D-4
AC 27.607    Fasteners .......................................................................................... D-6
AC 27.609    Protection of Structure ...................................................................... D-6
AC 27.610    Lightning Protection .......................................................................... D-8
AC 27.611    Inspection Provisions ........................................................................ D-11
AC 27.613     Material Strength Properties and Design Values............................... D-13
AC 27.613A   Material Strength Properties and Design Values............................... D-14
AC 27.619    Special Factors ................................................................................. D-16
AC 27.621    Casting Factors................................................................................. D-17
AC 27.623    Bearing Factors................................................................................. D-27
AC 27.625     Fitting Factors ................................................................................... D-28
AC 27.625A   Fitting Factors  .................................................................................. D-29
AC 27.629       Flutter................................................................................................ D-29

                          ROTORS

AC 27.653    Pressure Venting and Drainage of Rotor Blades............................... D-31
AC 27.659   Mass Balance.................................................................................... D-31
AC 27.661    Rotor Blade Clearance...................................................................... D-31
AC 27.663    Ground Resonance Prevention Means ............................................. D-33
AC 27.663A  Ground Resonance Prevention Means ............................................. D-35

                      CONTROL SYSTEMS

AC 27.671    Control Systems - General................................................................ D-36
AC 27.672     Stability Augmentation, Automatic, and Power-Operated Systems... D-36
AC 27.673    Primary Flight Control ....................................................................... D-37
AC 27.674    Interconnected Controls .................................................................... D-37
AC 27.675       Stops................................................................................................. D-38
AC 27.679    Control System Locks ....................................................................... D-40
AC 27.681     Limit Load Static Tests...................................................................... D-40.1
AC 27.683    Operation Tests................................................................................. D-41
AC 27.685    Control System Details...................................................................... D-41
AC 27.685A   Control System Details...................................................................... D-42
AC 27.687    Spring Devices .................................................................................. D-43
AC 27.691    Autorotation Control Mechanism....................................................... D-43
AC 27.695    Power Boost and Power-Operated Control System .......................... D-44


                                                                               Page vii

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →