Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
AC 27-1B, Chg 1 2/12/03
(MANUAL IDENTIFICATION)
ATTACHMENT 4
TYPE DESIGN CHANGE
ICA RECOMMENDED PROCEDURES
The following information is intended for guidance to assist the applicant in preparing an ICA.
For this sample, we will use a twidget, which is a sounder attached to an extendible cable
assembly connected to a pivoting arm, which is mounted to the side of the fuselage structure at
the right cabin door forward frame.
NOTE: The twidget manufacturer's ICA does not meet the requirements of Appendix A
and cannot be referenced.
The following step-by-step procedure in this sample can be used to prepare an ICA for that
appliance:
1. Determine the following:
a. What modifications to the rotorcraft will be required.
b. Determine what appliances will be replaced or added to the rotorcraft.
c. Determine which ATA chapters of the original rotorcraft manufacturer's maintenance
manual will be affected by this TDC and which additional ATA chapters will be affected.
2. Review Appendix A, Part 27. Using the information derived in paragraph 1, determine which
paragraphs are applicable and which are not applicable. As defined in Figure 2, provide the
status of each requirement on the applicable paragraph. If the requirement is not applicable,
place an N/A within the parentheses ( ). Address the remaining requirements in the ICA. A
completed document for the twidget installation (see Figure 2) is included.
3. Prepare the ICA, which includes the applicable requirements specified in Appendix A to
Part 27. This can be done by using the information provided in the Instructions for Continued
Airworthiness Template. The regulatory requirements in the sample manual are in bold type.
Information to be copied is in normal type. Information in italics is for information only and
should not be copied. See Instructions for Continued Airworthiness sample manual.
4. Ensure that the ICA includes the following:
a. A Cover Page, which will readily identify the publication as the applicant's ICA for that
make and model rotorcraft.
b. A List of Effective Pages, which lists each page in the ICA and its revision number and
revision date.
c. A Record of Revisions Page for listing the revisions which have been inserted in the ICA.
REVISION: (DATE)
Revision 3 Page 1
Page Apdx A - 62
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.