Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/12/03 AC 27-1B, Chg 1
(MANUAL IDENTIFICATION)
REQUIREMENTS
(Continued)
c. Any special procedures and limitations that apply.
Reference Appendix A, A27.3 (a)(3). This is required if engine(s), rotor(s), and/or appliances
require controlling or operating.
d. The information should identify the appliance or component and should identify the
control(s) and system used to control the appliance or component.
e. The ICA should provide instructions on operating the appliance or component and any
limitation or precautions. Operations information can be found in the Rotorcraft Flight
Manual or Pilot Operating Handbook. However basic control and operating information is
an Appendix A requirement and should be contained in the ICA.
7. SERVICING INFORMATION
Servicing information that covers details regarding:
a. Servicing points and their locations.
b. Types of fluids to be used.
c. Capacities of tanks and reservoirs.
d. Pressures applicable to the various systems.
Reference Appendix A, A27.3 (a)(4). This is required when applicant determines the rotorcraft
and its engine(s), rotor(s), and appliances will require servicing. The information is normally
included in chapters that address servicing and in Chapter 12.
8. LOCATION OF ACCESS PANELS
Location of access panels for inspection and servicing.
Reference Appendix A, A27.3 (a)(4). This is required when panels, plates, fairing, cowling, etc.
should be removed to provide access to the rotorcraft, its engine(s), rotor(s), and appliances for
inspection and servicing. This information is normally included in chapters that address access
and in Chapters 6 and 12.
9. LUBRICATING INFORMATION
Lubricating information that covers details regarding:
a. Lubrication points and their location.
REVISION: (PAGE NUMBER)
Revision 3 ( )-00-00 Page 3
Page Apdx A - 45
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.