FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-43

PDF page 1146 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1146
AC 27-1B · Apdx A-43Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                         CHAPTERS
                 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 32, 33, 34, 35, 36, 37, 45,
                              49; Airframe Systems ( )-00-00
                            52, 53, 54, 55, 56, Structures ( )-00-00
                            62, 63, 64, 65, 66, 67; Rotors ( )-00-00
              71, 72, 73, 74, 75, 76, 77, 78, 79, 80, and 83. Powerplant ( )-00-00

                       REQUIREMENTS

The applicant must review requirements for each chapter, determine items that are applicable,
and prepare appropriate ICA.

1. INTERFACE INFORMATION

Any required information relating to the interface of appliances, engine or engines, rotor or
rotors with the rotorcraft. Reference Appendix A, A27.1 (b). This is required when appliances,
engine or engines, and rotor or rotors are mounted, attached, or connected to rotorcraft.
Applicant should provide information relating to the installation. Interface information should
include the system(s) from which it receives electrical power, fluids (fuel, oil, hydraulic, etc.),
indications, and the controls that interface with rotorcraft.

2. DESCRIPTION OF ROTORCRAFT AND ITS SYSTEMS AND INSTALLATIONS

A description of the rotorcraft and its systems and installations.
Reference Appendix A, A27.3 (a)(2). This is always required as applicable.

   a. The description of the rotorcraft should include the type of rotorcraft (passenger, cargo),
type of structure (metal, composite), number of rotors, number of engines, and type of
landing gear (retractable or skids)

   b. The description of the rotorcraft’s systems should include the component or parts of the
system and how systems interface with the rotorcraft or other systems.

   c. The description of the installations should include the location of the installation, and how
the system is installed.

3. DESCRIPTION OF ROTORCRAFT’S ENGINE(S)

A description of the rotorcraft’s engine(s) and its systems and installations. Reference
Appendix A, A27.3 (a)(2). This is always required as applicable.

   a. The description of the engine should include the type (piston or turbine), the manufacturer,
engine model, horsepower, etc.
REVISION:                                         (PAGE NUMBER)
Revision 3                                                                              (  )-00-00 Page 1


                                                                  Page Apdx A - 43

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →