FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-37

PDF page 1140 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1140
AC 27-1B · Apdx A-37Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)

                        CHAPTER 11
                   PLACARDS AND MARKINGS

1. PLACARD AND MARKING INFORMATION

   a. Although there is no requirement for placards or markings to be in the Instructions for
Continued Airworthiness (ICA), placards and markings for the rotorcraft are part of the type
design of the rotorcraft and are contained in type design drawing.
   b. The placards and markings information normally include:
      (1) General information about placards and markings.
      (2) Index of exterior placards and markings.
      (3) Index of interior placards and markings.
      (4) Location of placards and markings.
      (5) A procedure for installing and removing placards and markings.
      (6) Figures may be used to show placards and markings, and their location.

   c. Maintenance personnel are required to ensure the rotorcraft meets its type design. To
accomplish this, maintenance personnel need to know what placard and markings are required
to be on the rotorcraft; therefore, the information on placards and markings should be in the
Instructions for Continued Airworthiness.





REVISION:                                         (PAGE NUMBER)
Revision 4                                                        11-00-00  Page 1


                                                                  Page Apdx A - 37

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →