FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-31

PDF page 1134 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1134
AC 27-1B · Apdx A-31Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 8
                   LEVELING AND WEIGHING

1. LEVELING INFORMATION
   a. The ICA must include leveling information. Reference Appendix A, A27.3 (a)(4).
   b. Leveling information normally includes:
      (1) A description of the leveling system.
      (2) Location(s) of the leveling points.
      (3) Procedure for installation and removal of special fixtures required for leveling.
      (4) Description of the fixtures and their location.
      (5) Special tools and equipment required for leveling.
      (6) Procedure for leveling including: actions required before leveling; the order and
method of leveling the helicopter; and actions required after leveling.
      (7) Any precaution to be taken.

2. WEIGHING AND DETERMINING THE CENTER OF GRAVITY INSTRUCTIONS
   a. The ICA must include weighing and determining center of gravity instructions.
Reference Appendix A, A27.3 (a)(4).

   b. Weighing and determining the center of gravity instructions should include:
      (1) A description of the weighing system.
      (2) Location(s) of the weighing points.
      (3) Special tools or equipment required for weighing.
      (4) Procedure for weighing includes actions to be taken before weighing, the order and
method of weighing the helicopter, and actions to be taken after weighing.
      (5) Procedure for determining the basic weight and center of gravity.
      (6) Samples of weighing forms.
      (7) Any precautions to be taken.

   c. When a TDC is made and the weight and balance procedure in the rotorcraft maintenance
manual will not change, the applicant needs only provide for each product or appliance the
weight, and location (arm).

   d. The use of a table is recommended.





REVISION:                                         (PAGE NUMBER)
Revision 3                                                        08-00-00  Page 1


                                                                  Page Apdx A - 31

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →