FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-13

PDF page 1116 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1116
AC 27-1B · Apdx A-13Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                        CHAPTER 1
                       INTRODUCTION

The requirements of Appendix A to Part 27are identified by bold type and are contained in the
Introduction Chapter of this document. These requirements should be included in the
Instructions for Continued Airworthiness (ICA). Items in regular type are not required by the
Federal Aviation Regulations (FAR)/Joint Airworthiness Regulation (JAR), but we recommend
the applicant include those items in the ICA for standardization and clarity. The underlined
words and sentences are to emphasize the information. The same requirements exist for a Type
Certificate (TC), Supplemental Type Certificate (STC), or other changes to the type design as
specified in the Type Certificate Data Sheet accepted under a Field Approval (FA). The term
Type Design Change refers to changes to the type design of the rotorcraft made under TC, STC,
or FA. ICA for Type Design Change (TDC) need not include ATA chapters not affected by the
modification. Appropriate text in regular type can be copied from the ICA Template. Text in
italics and the appendices are for instruction and are not to be copied.
This guidance is intended for applicants who are required to comply with § 27.1529,
Amendment 18, to prepare an ICA acceptable to the FAA/AUTHORITY, and applicants required
to prepare an ICA for a major alteration accepted under a FA. The ICA Template may be used
by any applicant who wishes to prepare an ICA.

1. ACCEPTABLE TO THE FAA/AUTHORITY
   a. The applicant must prepare Instructions for Continued Airworthiness in accordance
with Appendix A to FAR/JAR Part 27 that are acceptable to the FAA/AUTHORITY.
Reference § 27.1529. - As appropriate.

   b. For the applicant’s proposed ICA to be acceptable to the FAA/AUTHORITY, they should
contain:
      (1) The applicable requirements specified in Appendix A to FAR/JAR Part 27.
      (2) Correct terminology and/or correct references.
      (3) A Cover Page that will readily identify the publication as the applicant’s ICA for that
make and model rotorcraft.
      (4) A revision control procedure and Record of Revisions that will show currency of the
ICA.
      (5) A means of identifying each page of the publication and a List of Effective Pages that
lists each page and its revision number.
      (6) A Table of Contents indicating the subject and location and providing ease of use for
maintenance personnel.

   c. FAA/AUTHORITY cannot make a determination of acceptability of the ICA without a
complete ICA and all publications referenced in the applicant’s ICA. ICA review will be
discontinued when it is determined:
      (1) The ICA is not complete.
      (2) That all referenced publications were not submitted with the ICA.
REVISION:                                         (PAGE NUMBER)
Revision 4                                                           01-00-00  Page 1


                                                                  Page Apdx A - 13

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →