FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page Apdx A-7

PDF page 1110 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1110
AC 27-1B · Apdx A-7Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/12/03                                          AC 27-1B, Chg 1

                                      (MANUAL IDENTIFICATION)
                      LIST OF EFFECTIVE PAGES

LIST OF REVISIONS                 Revision 0 (Original Issue)....  ..............August 4, 1997
                                      Revision 1 ..................................……January 30,1998
                                      Revision 2 ……… ……………………June 18,1998
                                      Revision 3 …………………………..October 21,1999
                                      Revision 4 …… ……………………….August 4, 2000

LIST OF EFFECTIVE PAGES
Title                                                       Pages        Revision No.
COVER                                                                                            i, ii BLANK            4
RECORD OF REVISION                                                                iii, iv BLANK           4
LIST OF EFFECTIVE PAGES                                  v THRU vi             4
TABLE OF CONTENTS                                                      vii THRU x            4
CHAPTER 1 INTRODUCTION  01-00-00                     1 THRU 8             4
CHAPTER 4 AIRWORTHINESS LIMITATION
         SECTION 04-00-00                                      1, 2 BLANK            4
CHAPTER 5 INSPECTIONS 05-00-00                        1 THRU 4             4
CHAPTER 6 DIMENSION AND ACCESS 06-00-00                  1, 2 BLANK            3
CHAPTER 7 LIFTING AND SHORING 07-00-00                     1, 2 BLANK            2
CHAPTER 8 LEVELING AND WEIGHING 08-00-00                1, 2 BLANK            3
CHAPTER 9 TOWING AND TAXIING 09-00-00                      1, 2 BLANK            2
CHPATER 10 PARKING AND MOORING 10-00-00                 1, 2 BLANK            4
CHAPTER 11 PLACARDS AND MARKING 11-00-00                1, 2 BLANK            4
CHAPTER 12 SERVICING 12-00-00                                  1, 2 BLANK            2
CHAPTERS 20, 51, 60, 70, STANDARD
        PRACTICES ( )-00-00                                     1, 2 BLANK            3
CHAPTERS 21, 22, 23, 24, 25, 26, 27, 29, 30, 31, 33, 34,
      35, 36, 37, 45, 49, AIRFRAME SYSTEM ( )-00-00
          52, 53, 54, 55, 56, STRUCTURES ( )-00-00
          62, 63, 64, 65, 66, 67 ROTORS ( )-00-00
         71, 72, 73, 74, 75, 76, 77, 78, 79, 80, and
    83 POWERPLANT  ( )-00-00                                 1,2 ,3, 4, 5,             3
                                                                          6, 7, 8                 4

Attachment 1  PART 27 REQUIREMENTS                        1, THRU 5, 6 BLANK       4
Attachment 2  INSTRUCTIONS FOR CONTINUED
         AIRWORTHINESS PROCEDURE INFORMATION    1 AND 2               3
Attachment 3 ATA CHAPTER LISTING                               1, 2 BLANK            3
Attachment 4 TYPE DESIGN CHANGE ICA RECOMMENDED
       PROCEDURE                                             1, THRU 9,10 BLANK    4


REVISION:                                         (PAGE NUMBER)
Revision 4                                                       Page v


                                                                   Page Apdx A - 7

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →