FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1093

PDF page 1093 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1093
AC 27-1B · 1093Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

AC 27-1B, Chg 7                                                                                      2/4/2016

 Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
                       failure condition description but in the systems description or assumptions section.

ATA 79-00-00 – OIL
                        Failure      Phase of      Effect of the Failure     Classification  Notes          Supporting   Verification        Function ATA                 Condition    Operation    on the Aircraft, Crew   of the FC      (assumptions)  Material    Method        Description                     (FC)                   and Occupants
 7931   Engine Oil     Loss of oil     ALL      Loss of indication can                                                  Analysis
        Pressure        press                        delay crew action long
                            indication.                 enough to prevent
                                                     continued safe flight
                                                and landing.
                        Misleading     ALL        If the indication to the                                                 Analysis and
                              oil press                         pilot is a warning, the                                                   Test
                            indication.                     likely requirement is to
                                                     land immediately.
                                               Worst case is ditching
                                                           in poor conditions
                                                     causing a large
                                                       reduction in safety
                                                  margins or functional
                                                               capabilities.
 7932   Engine Oil     Loss of oil     ALL      Loss of indication is                                                   Analysis
        Quantity        quantity                     considered to be a
                            indication.                     significant increase to
                                                               pilot workload but only
                                           when required to be
                                                      displayed per 14 CFR
                                                       27.1337(d)(2).





                              Figure AC 27 MG 21-1. Generic Examples by ATA.

Page MG 21 - 42

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →