FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1086

PDF page 1086 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1086
AC 27-1B · 1086Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                            AC 27-1B, Chg 7

 Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
                       failure condition description but in the systems description or assumptions section.

ATA 63-00-00 – MAIN ROTOR DRIVE
                        Failure      Phase of    Effect of the Failure on   Classification   Notes          Supporting   Verification        Function ATA                 Condition    Operation  the Aircraft, Crew and   of the FC       (assumptions)   Material    Method        Description                     (FC)                   Occupants
        Provide MGB   Loss of oil     ALL   A significant reduction                                                   Analysis and
           oil pressure     pressure                     in safety margins would                                                   Test
         indication       indication.                   exist due to the possible
                                                   delay in crew action to
                                               an actual loss of oil.

                                               Aircrew workload
                                                      increases slightly due to
                                                changing the planned
                                                             flight and the
                                                  monitoring of secondary
                                                         indications.
                       Erroneous     ALL   A substantial reduction                                                   Analysis and
                        annuncia­                   in safety margins would                                                   Test
                           tion of low                   exist due to the delayed
                              oil pressure                 reaction of the crew to
                        warning.                 an actual loss of oil.

                                                       Slight increase in
                                                   aircrew workload due to
                                                        conflicting low oil
                                                     pressure warning and oil
                                                     pressure indicator.





                              Figure AC 27 MG 21-1. Generic Examples by ATA.

                                                                               Page MG 21 - 35

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →