FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1078

PDF page 1078 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1078
AC 27-1B · 1078Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                            AC 27-1B, Chg 7

 Note: Not all ATA chapters or subchapters have been included. Also, the italicized entries are not usually included in the
                       failure condition description but in the systems description or assumptions section.

ATA 34-00-00 - NAVIGATION
                        Failure       Phase of    Effect of the Failure on   Classification  Notes         Supportin   Verification        Function ATA                 Condition     Operation  the Aircraft, Crew and    of the FC      (assumptions)  g Material  Method        Description                     (FC)                    Occupants
3416    Altimeter       Total loss of    ALL     Aircrew workload                                                      Analysis and
                 ALL altitude                increases to a level at                                                    Test
                           indication in              which continued safe
                        IFR.                            flight and landing is not
                                                   guaranteed due to
                                           unknown height above
                                                       the ground; no external
                                                       cues.
                         Total loss of    ALL     Aircrew workload
                ALL altitude                 substantially increases
                           indication in              due to unknown height
                          night VFR.                above the ground; low
                                                        external cues.
                        Misleading     ALL     Aircrew workload                                                      Analysis and
                           indication                   increases to a level at                                                    Test
                         and/or                   which continued safe
                        malfunction                    flight and landing is not
                          of the                      guaranteed due to
                            altitude in               unknown height above
                        IFR.                         the ground; no external
                                                       cues.





                              Figure AC 27 MG 21-1. Generic Examples by ATA.

                                                                               Page MG 21 - 27

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →