Certification of Normal Category Rotorcraft — Changes 1–9
Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.
This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
2/4/2016 AC 27-1B, Chg 7
(ii) Related Documents.
Document Title
SAE- ARP 4155 Human Interface Design Methodology for Integrated
Display Symbology
SAE-ARP 4033 Pilot-System Integration
SAE-ARP 4102 Flight Deck Panels, Controls, and Displays
SAE-ARP 4102-7 Electronic Displays
SAE-ARP 4927 Integration Procedures for the Introduction of New
Systems to the Cockpit
SAE-ARD 50019 Human Engineering Issues for Enhanced Vision Systems
DOT/FAA/RD-93/5 Human Factors for Flight Deck Certification Personnel
DOT/FAA/AM-13/21 Multi-Function Displays: A Guide for Human Factors
Evaluation
c. Scope.
(1) The objective of this MG is to provide guidance regarding the regulatory HF components that
should be considered during a certification project for rotorcraft. While applicants are the main target
audience, this guidance can be used by all FAA project team members including:
(i) Aircraft Evaluation Group (AEG) inspectors,
(ii) avionics engineers,
(iii) project managers,
(iv) flight test pilots and engineers,
(v) HF specialists and engineers,
(vi) propulsion engineers, and
(vii) systems engineers.
(2) This MG is general and high level, covering the HF aspects of certificating a rotorcraft or
system installation on a new or previously-certificated normal category rotorcraft. It is intended to guide
applicants and certification engineers on what they should consider regarding HF during project planning
and execution
Page MG 20 - 5
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Start with the certification basis and the function.
Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.
1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.