FAA / Advisory circular

AC 27-1B

Certification of Normal Category Rotorcraft — Changes 1–9

Normal category rotorcraft guidance with Changes 1–9 incorporated. Search the complete AC or start with the system safety, flight controls and instrument-flight guidance.

Start with the scope.

This source includes guidance for different amendments of Part 27. Match the guidance to the aircraft’s agreed certification basis: the 27.1309 entries for Amendments 27-21, 27-46 and 27-51 are separate. The base AC was issued on 30 September 1999; Change 9 is dated 23 June 2023. The FAA catalogue’s 30 September 2008 date is not the date of the latest change.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

PDF page 1003

PDF page 1003 of 1196

Enlarge original ↗

Original FAA page, including its printed amendment and change markings. Extracted words support search; text reflow has not been reviewed.

Original FAA AC 27-1B, PDF page 1003
AC 27-1B · 1003Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

2/4/2016                                                  AC 27-1B, Chg 7


                              CHAPTER 3
                        AIRWORTHINESS STANDARDS
                    NORMAL CATEGORY ROTORCRAFT

                      MISCELLANEOUS GUIDANCE (MG)

AC 27 MG 19.     GUIDANCE ON ELECTRONIC DISPLAY SYSTEMS (EDS) FOR ROTORCRAFT
               INSTALLATIONS

    a. Background.

         (1) The increased use of microprocessor technology in avionic systems has resulted in the use of
computer-generated graphics to replace conventional electromechanical instruments required by 14 CFR
27.1303 to present information to the pilots. Simple systems use electronic displays to replace
electromechanical horizontal situation indicators (HSI) and attitude direction indicators (ADI). Other
electronic displays combine ADI and HSI displays on one display. These electronic display systems
(EDS) normally include a primary flight display (PFD) displaying primary flight information (attitude,
airspeed, altitude, vertical speed and basic navigation course deviation indication (CDI) and for precision
or precision-like approaches, vertical deviation indications (VDI)). EDS can include multi-function displays
and engine indication caution advisory system (EICAS) displays. Additionally, some EDS also
incorporate flight management system logic, which increases the level of integration complexity.

         (2) The EDS for which approval is sought must meet the minimum performance standards
prescribed in the corresponding technical standard order (TSO) for the features the system provides (e.g.,
airspeed, attitude, flight guidance, color, symbology, operation, and accuracy). Information pertaining to
the flight director function performed by the EDS can be found in section 27.1335 of this AC. Information
pertaining to the location of the displays is contained in section 27.1321 of this AC. Additional discussion
of the recommendations for an EDS is contained in the latest versions of AC 25-11, Electronic Flight Deck
Displays and AC 23.1311-1, Installation of Electronic Display in Part 23 Airplanes. There should be an
evaluation of the integration of EDS into existing cockpits along with previously installed avionics and
autoflight systems to ensure the resulting pilot-system interface does not increase pilot workload or
reduce system safety margins.

    b. Reference Materials.

         (1) Regulatory and Guidance material.





                                                                    Page MG 19 - 1

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Start with the certification basis and the function.

Identify the applicable amendment before selecting the safety guidance. Connect intended functions and operating conditions to failure conditions, architecture decisions, common-cause considerations, verification and limitations. For flight controls and IFR work, carry the relevant 27.672, 27.1329 and Appendix B assumptions into the system safety and compliance evidence.

Explore the rotorcraft safety and certification approach →
Source edition and reading coverage

1196 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 2dfac16a3644dc18997069cca78746c10726e4b70d3aba996fc87843ffe68a2b

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →