FAA / Advisory circular

AC 21.17-4

Type Certification—Powered-lift

Follow the FAA powered-lift certification approach and navigate the airworthiness criteria in Appendix A.

Start with the scope.

Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page 7

PDF page 7 of 64

Enlarge original ↗

Original source view; text reflow has not yet been reviewed

Original FAA AC 21.17-4, PDF page 7
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

07/18/2025                                               AC 21.17-4

6.10    Imported Products.
       The import product type certification requirements of § 21.29 and import product
         airworthiness certification requirements of § 21.183(c) are applicable to powered-lift.
       The FAA type certification basis for import powered-lift will also be shown on the
      TCDS as 14 CFR 21.17(b).

6.11    Use of Designees.
     FAA designees may be used to support certification activities for special classes of
          aircraft (i.e. 14 CFR 21.17(b)). However, the designee’s certificate letter of authority
      (CLOA) may require expansion or additional authorities before a designee can be used
       on a special class project (e.g., to include any applicable requirements for the 14 CFR
        21.17(b) project). Refer to FAA Order 8000.95 (Designee Management Policy) and the
         applicable volume based on designee type for specific information. If more guidance is
        needed, contact the FAA project team.

6.12    Airworthiness Directives.
         Powered-lift are products as defined in § 39.3. Accordingly, airworthiness directives
      may be issued to address an unsafe condition in a powered-lift in accordance with part
         39.

6.13   Major Repairs and Alterations.
         Field approvals under the provisions of parts 43 and 145 may also be used to approve an
         altered or repaired individual powered-lift for return to service.

6.14    Identification and Registration Marking.
       The identification and registration marking requirements of part 45 are applicable to
         powered-lift. AC 45-2, Identification and Registration Marking, provides guidance and
        information concerning the identification and marking requirements of part 45.

7     ACCEPTABLE CRITERIA.

7.1     Appendix A.
        Applicants may propose using the airworthiness criteria in appendix A as the
          certification basis for a powered-lift that meets the applicability in paragraph 5.2. For
        designs that the FAA determines need use only the criteria in appendix A for the
          certification basis with no additions or changes, the FAA does not need to announce the
          criteria in the Federal Register for notice and comment.

7.2     Other Airworthiness Criteria.
         In the event the Administrator finds that compliance with airworthiness criteria in
        appendix A is inadequate or otherwise inappropriate as a certification basis of a
         powered-lift due to its unique, novel, or unusual design or design features, the
        Administrator may require an applicant to comply with alternate or additional criteria.
         Additionally, applicants may propose other criteria with their certification plan per the
        process in FAA Order 8110.4, Type Certification. If found to be acceptable by the

                                          7

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Begin with the aircraft and the agreed basis.

Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.

Explore our eVTOL safety and certification approach →
Source edition and reading coverage

64 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: e1a60e5f5ed4f34764beb0866a0a1b65471832a1cf169ef670a6dd6bf434297e

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →