Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
07/18/2025 AC 21.17-4
F&R testing may be adjusted through other means, such as representative rig and bench
tests with agreement from the FAA.
6.5 Instructions for Continued Airworthiness.
Instructions for Continued Airworthiness (ICA) are required for powered-lift in
accordance with § 21.50.
6.6 Provisional Type Certificates.
The procedural requirements for the issuance of provisional type certificates in part 21,
subpart C, are applicable to powered-lift.
6.7 Changes to Powered-Lift Type Certificates.
The procedural requirements of part 21, subparts D and E, are applicable for approving
changes to type certificates issued for powered-lift designs, including the issuance of
supplemental type certificates.
6.8 Production Approvals.
The procedural requirements in part 21, subparts F, G, K, and O for production
approvals, including parts manufacturer approvals and technical standard order
authorizations, are applicable to powered-lift and articles installed on powered-lift.
6.9 Airworthiness Certification.
The procedural requirements for the issuance of an airworthiness certificate in part 21,
subparts H and I, apply to powered-lift. To receive a standard airworthiness certificate
under § 21.183(a) or (b), the powered-lift must have a type certificate. Powered-lift will
be issued standard airworthiness certificates in the same manner as any other aircraft
receiving the same certificate. Since powered-lift are type certificated as special class of
aircraft, the category in FAA Form 8100-2, block 4, will be identified as “Powered
lift—Special Class.” Powered-lift will also be issued special airworthiness certificates
identified in § 21.175(b), using FAA Form 8130-7, in the same manner as any other
aircraft receiving the same certificate.
6
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Begin with the aircraft and the agreed basis.
Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.