FAA / Advisory circular

AC 21.17-4

Type Certification—Powered-lift

Follow the FAA powered-lift certification approach and navigate the airworthiness criteria in Appendix A.

Start with the scope.

Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page 3

PDF page 3 of 64

Enlarge original ↗

Original source view; text reflow has not yet been reviewed

Original FAA AC 21.17-4, PDF page 3
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

07/18/2025                                               AC 21.17-4

3    BACKGROUND.

3.1      Part 21 provides procedures for the type certification and airworthiness certification of
         special classes of aircraft. Special classes of aircraft include gliders and powered
          gliders, airships, powered-lift, and other kinds of aircraft, which would be eligible for a
        standard airworthiness certificate but for which no airworthiness standards have as yet
        been established as a separate part of 14 CFR chapter I, subchapter C. Airworthiness
         standards for these special classes of aircraft are the portions of the requirements in
         parts 23, 25, 27, 29, 31, 33, and 35 of 14 CFR found by the FAA to be appropriate and
         applicable to the specific type design and any other airworthiness criteria found by the
     FAA to provide an equivalent level of safety to the existing standards.

3.2      Powered-lift is defined in part 1 as a heavier-than-air aircraft capable of vertical takeoff,
          vertical landing, and low speed flight that depends principally on engine-driven lift
        devices or engine thrust for lift during these flight regimes and on nonrotating airfoil(s)
         for lift during horizontal flight. Powered-lift have characteristics of both an airplane and
        a rotorcraft. They have the capability to function as a rotorcraft for takeoff and landing
       and as an airplane during cruise flight. This combination of lift capabilities creates the
         potential for increased speeds and duration, compared to rotorcraft, during the enroute
         portion of the flight.

3.3     Recent applications for the type certification of powered-lift have proposed passenger
         seating configurations of six or less, weighing 12,500 pounds or less, and utilizing
        battery-powered electric engines for propulsion. For each of these projects, the FAA has
        published the proposed airworthiness criteria, along with an explanation of its
        equivalency determination, in the Federal Register for public notice and comment.

3.4     The FAA used its experience with those recent powered-lift applications to develop the
          criteria in appendix A. This AC establishes a more efficient path in designating the type
          certification basis for certain powered-lift projects, as the FAA will not need to
        announce the criteria for each project in the Federal Register for notice and comment
         for those designs for which the FAA has deemed it appropriate to use the criteria in this
     AC with no additions or changes.

4     DISCUSSION.

4.1     Appendix A of this AC contains design criteria found acceptable to the FAA for type
          certification of powered-lift that meet the applicability in paragraph 5.2. These
         airworthiness criteria were developed from the airworthiness standards in parts 23, 27,
         33, and 35 and include definitions and performance-based safety objectives specific for
         powered-lift and the installed electric engines and propellers.

4.2      In the event that the airworthiness criteria prescribed in appendix A of this AC are
        inadequate or otherwise inappropriate as a certification basis of a specific powered-lift
       due to its unique design or design features, the FAA may develop other criteria using
         the process in paragraph 7.2 of this AC.


                                          3

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Begin with the aircraft and the agreed basis.

Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.

Explore our eVTOL safety and certification approach →
Source edition and reading coverage

64 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: e1a60e5f5ed4f34764beb0866a0a1b65471832a1cf169ef670a6dd6bf434297e

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →