FAA / Advisory circular

AC 21.17-4

Type Certification—Powered-lift

Follow the FAA powered-lift certification approach and navigate the airworthiness criteria in Appendix A.

Start with the scope.

Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page 4

PDF page 4 of 64

Enlarge original ↗

Original source view; text reflow has not yet been reviewed

Original FAA AC 21.17-4, PDF page 4
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

07/18/2025                                               AC 21.17-4

4.3     For new projects, applicants may propose using airworthiness criteria from the
          certification basis of previously approved powered-lift designs. Such a proposal should
        be evaluated by the FAA for currency based upon advancement of the state-of-the-art
         powered-lift design, service experience, and amendments to relevant regulations, such
         as parts 23, 27, 33, and 35. This applies regardless of whether the applicant is proposing
         to reuse criteria from its prior project or from the project of another applicant.

4.4     Equivalent level of safety findings may be appropriate in lieu of changes to the criteria
         in appendix A of this AC. In such cases, a showing of equivalent safety should be
        proposed by the applicant and approved using the process as discussed in FAA Orders
        8110.4 and 8110.112. Such equivalent safety findings become part of the type
          certification basis and are listed on the type certificate data sheet (TCDS).

4.5     The performance-based airworthiness criteria in appendix A capture the safety intent of
        each requirement. For each criteria, the specific means of compliance, proposed by the
         applicant and accepted by the FAA, will be a detailed design standard that, if met,
        accomplishes the safety intent of the criteria. The FAA will accept means of compliance
        found by the agency to be appropriate and applicable to the specific powered-lift design.

4.6     The airworthiness criteria in appendix A incorporate an “essential performance”
         approval, as well as an optional “increased performance” approval with greater aircraft
        performance capability requirements. Applicants must meet either the essential or
         increased performance requirements. Alternatively, applicants may propose designs that
         are approved for both essential and increased performance with appropriate and
         different operating limitations.

5     APPLICABILITY.

5.1     The procedures in this AC apply to all powered-lift proposed to be type certificated as
         special class under § 21.17(b).

5.2     The airworthiness criteria in appendix A of this AC apply to powered-lift with a
      maximum gross weight of 12,500 pounds or less, a passenger seating configuration of
         six or less, and battery-powered electric engine driven propellers for propulsion.





                                          4

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Begin with the aircraft and the agreed basis.

Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.

Explore our eVTOL safety and certification approach →
Source edition and reading coverage

64 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: e1a60e5f5ed4f34764beb0866a0a1b65471832a1cf169ef670a6dd6bf434297e

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →