FAA / Advisory circular

AC 21.17-4

Type Certification—Powered-lift

Follow the FAA powered-lift certification approach and navigate the airworthiness criteria in Appendix A.

Start with the scope.

Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page A-50

PDF page 59 of 64

Enlarge original ↗

Original source view; text reflow has not yet been reviewed

Original FAA AC 21.17-4, PDF page 59
AC 21.17-4 · A-50Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

07/18/2025                                               AC 21.17-4
                                                                        Appendix A

(b) The Instructions for Continued Airworthiness for each aircraft must include the Instructions
for Continued Airworthiness for each engine and propeller (hereinafter designated “products”),
for each appliance required by 14 CFR chapter I, and any required information relating to the
interface of those appliances and products with the aircraft. If Instructions for Continued
Airworthiness are not supplied by the manufacturer of an appliance or product installed in the
aircraft, the Instructions for Continued Airworthiness for the aircraft must include the
information essential to the continued airworthiness of the aircraft.
(c) The applicant must submit to the FAA a program to show how changes to the Instructions for
Continued Airworthiness made by the applicant or by the manufacturers of products and
appliances installed in the aircraft will be distributed.
PL.4102 Format.
(a) The Instructions for Continued Airworthiness must be in the form of a manual or manuals as
appropriate for the quantity of data to be provided.
(b) The format of the manual or manuals must provide for a practical arrangement.
PL.4103 Content.
The contents of the manual or manuals must be prepared in the English language. The
Instructions for Continued Airworthiness must contain the following manuals or sections and
information:
(a) Aircraft maintenance manual or section.
(1) Introduction information that includes an explanation of the aircraft's features and data to the
extent necessary for maintenance or preventive maintenance.
(2) A description of the aircraft and its systems and installations including its engines, propellers,
and appliances.
(3) Basic control and operation information describing how the aircraft components and systems
are controlled and how they operate, including any special procedures and limitations that apply.
(4) Servicing information that covers details regarding servicing points, capacities of tanks,
reservoirs, types of fluids to be used, pressures applicable to the various systems, location of
access panels for inspection and servicing, locations of lubrication points, lubricants to be used,
equipment required for servicing, tow instructions and limitations, mooring, jacking, and
leveling information.
(b) Maintenance Instructions.
(1) Scheduling information for each part of the aircraft and its engines, auxiliary power units,
propellers, accessories, instruments, and equipment that provides the recommended periods at
which they should be cleaned, inspected, adjusted, tested, and lubricated, and the degree of
inspection, the applicable wear tolerances, and work recommended at these periods. However,
the applicant may refer to an accessory, instrument, or equipment manufacturer as the source of
this information if the applicant shows that the item has an exceptionally high degree of
complexity requiring specialized maintenance techniques, test equipment, or expertise. The
recommended overhaul periods and necessary cross reference to the Airworthiness Limitations
section of the manual must also be included. In addition, the applicant must include an inspection


                                       A-50

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Begin with the aircraft and the agreed basis.

Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.

Explore our eVTOL safety and certification approach →
Source edition and reading coverage

64 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: e1a60e5f5ed4f34764beb0866a0a1b65471832a1cf169ef670a6dd6bf434297e

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →