Original source view; text reflow has not yet been reviewed

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
07/18/2025 AC 21.17-4
Appendix A
(2) The specified ultimate loads without failure, but may exhibit permanent deformation.
(c) Engine structure necessary to transmit loads from the engine-driven lift devices to the
airframe must comply with all applicable design load conditions and safety factors defined in
subpart C.
PL.3325 Accessory attachments.
The engine must operate properly with the accessory drive and mounting attachments loaded.
Each engine accessory drive and mounting attachment must include provisions for sealing to
prevent contamination of, or unacceptable leakage from, the engine interior. A drive and
mounting attachment requiring lubrication for external drive splines, or coupling by engine oil,
must include provisions for sealing to prevent unacceptable loss of oil and to prevent
contamination from sources outside the chamber enclosing the drive connection. The design of
the engine must allow for the examination, adjustment, or removal of each accessory required for
engine operation.
PL.3326 Engine electrical systems.
(a) Applicability. Any system or device that provides, uses, conditions, or distributes electrical
power, and is part of the engine type design, must provide for the continued airworthiness of the
engine and must maintain electric engine ratings.
(b) Electrical systems. The electrical system must ensure the safe generation and transmission of
power, and electrical load shedding, if required, and that the engine does not experience any
unacceptable operating characteristics or exceed its operating limits. High voltage electrical
wiring interconnection systems must be protected against arc faults that could result in hazardous
engine effects, as defined in PL.3375(g)(2).
(c) Electrical-power distribution.
(1) The engine electrical-power distribution system must be designed to provide the safe transfer
of electrical energy throughout the electric engine. The system must be designed to provide
electrical power so that the loss, malfunction, or interruption of the electrical power source will
not result in a hazardous engine effect, as defined in PL.3375(g)(2).
(2) The system must be designed and maintained to withstand normal and abnormal conditions
during all ground and flight operations.
(3) The system must provide mechanical or automatic means of isolating a faulted electrical-
energy generation or storage device from affecting the safe transmission of electric energy to the
electric engine or detrimental engine effects in the intended aircraft application.
(d) Protection systems. The engine electrical system must be designed such that the loss,
malfunction, interruption of the electrical power source, or power conditions that exceed design
limits will not result in hazardous engine effects, as defined in PL.3375(g)(2).
(e) Electrical Power Characteristics. The applicant must identify, declare, and document in
accordance with the requirements in PL.3305 the characteristics of any electrical power supplied
from—
(1) The aircraft to the engine electrical system, for starting and operating the engine, including
transient and steady-state voltage limits, and
A-31