Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
07/18/2025 AC 21.17-4
Appendix A
(1) The equipment, systems, and installations must be designed so that one display of the
information essential for continued safe flight and landing will remain available to the flying
pilot after any single failure or combination of failures that is not shown to be extremely
improbable either—
(i) Without pilot action, or
(ii) With pilot action if the aircraft exhibits sufficient flying qualities under PL.2709.
(2) Instruments, systems, or equipment that are interconnected for a second pilot must be
designed to ensure continued normal functioning of pilot and copilot instruments in the event of
any malfunction not shown to be extremely improbable.
(3) For single-pilot configurations, instruments which require a static source must be provided
with a means of selecting a calibrated alternate source.
PL.2715 Aircraft flight manual.
An Aircraft Flight Manual or Aircraft Flight Manual IFR Supplement must be provided and must
contain—
(a) Limitations. The approved IFR flight envelope, the IFR flightcrew composition, the revised
kinds of operation, and the steepest IFR precision approach gradient for which the powered-lift is
approved;
(b) Procedures. Required information for proper operation of IFR systems and the recommended
procedures in the event of stability augmentation or electrical system failures; and
(c) Performance. If VYI differs from VY, climb performance at VYI and with maximum
continuous power throughout the ranges of weight, altitude, and temperature for which approval
is requested.
A-27
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Begin with the aircraft and the agreed basis.
Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.