Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
07/18/2025 AC 21.17-4
Appendix A
(1) Maintenance actions being carried out at stated intervals. This includes the verification of the
serviceability of items that could fail in a latent manner. When necessary to prevent hazardous
engine effects, these maintenance actions and intervals must be published in the ICA required
under PL.1529. Additionally, if errors in maintenance of the engine, including the control
system, could lead to hazardous engine effects, the appropriate procedures must be included in
the relevant engine manuals.
(2) Verification of the satisfactory functioning of safety or other devices at pre-flight or other
stated periods. The details of this satisfactory functioning must be published in the appropriate
manual.
(3) The provisions of specific instrumentation not otherwise required.
(4) Flight crew actions to be specified in the operating instructions established under PL.3305.
(f) The applicant must comply with paragraphs (d) and (e) of this section using the failure
definitions in paragraph (g) of this section.
(g) Unless otherwise approved by the Administrator, the following definitions apply to the
engine effects when showing compliance with these airworthiness criteria:
(1) A minor engine effect means the engine, despite its failure, performs its intended functions in
accordance with paragraphs (g)(1)(i) through (g)(1)(iii) of this section and complies with the
operability requirements of PL.3373 and PL.3389, as appropriate, with the exception of a slight
reduction in functional capabilities.
(i) Enables selected values of relevant control parameters to be maintained and the engine kept
within the approved operating limits over changing atmospheric conditions in the approved flight
envelope;
(ii) Allows modulation of engine power or thrust with adequate sensitivity over the declared
range of engine operating conditions; and
(iii) Does not create unacceptable power or thrust oscillation.
(2) The following effects will be regarded as hazardous engine effects:
(i) Non-containment of high-energy debris;
(ii) Concentration of toxic products in the engine bleed air intended for the cabin sufficient to
incapacitate crew or passengers;
(iii) Significant thrust in the opposite direction to that commanded by the pilot;
(iv) Uncontrolled fire;
(v) Failure of the engine mount system leading to inadvertent engine separation;
(vi) Release of the propeller by the engine, if applicable;
(vii) Complete inability to shut the engine down;
(viii) Electrocution of the crew, passengers, operators, maintainers, or others; and
(ix) Blockage of cooling systems that could cause the engine effects described in paragraphs
(g)(2)(i) through (g)(2)(viii) of this section.
(3) Any other engine effect is a major engine effect.
A-38
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Begin with the aircraft and the agreed basis.
Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.