Original source view; text reflow has not yet been reviewed

Extracted text for finding words
This extraction supports search. Read the original page for complete notation and layout.
07/18/2025 AC 21.17-4
Appendix A
PL.2535 Safety equipment.
Safety and survival equipment, required by the operating rules of title 14, chapter I, must be
reliable, readily accessible, easily identifiable, and clearly marked to identify its method of
operation.
PL.2540 Flight in icing conditions.
An applicant who requests certification for flight in icing conditions must show the following in
the icing conditions for which certification is requested:
(a) The ice protection system provides for safe operation; and
(b) The aircraft design must provide protection from slowing to less than the minimum speeds
defined in the flight profiles established under PL.2110 when the autopilot is operating.
PL.2545 Pressurized systems elements.
Pressurized systems must withstand appropriate proof and burst pressures.
PL.2550 Equipment containing high-energy rotors.
Equipment containing high-energy rotors must be designed or installed to protect the occupants
and aircraft from uncontained fragments.
SUBPART G—FLIGHTCREW INTERFACE AND OTHER INFORMATION
PL.2600 Flightcrew interface.
(a) The pilot compartment, its equipment, and its arrangement to include pilot view, must allow
each pilot to perform their duties for all sources of lift and phases of flight and perform any
maneuvers within the approved flight envelope of the aircraft, without excessive concentration,
skill, alertness, or fatigue.
(b) The applicant must install flight, navigation, surveillance, and powerplant controls and
displays, as needed, so qualified flightcrew can monitor and perform defined tasks associated
with the intended functions of systems and equipment, without excessive concentration, skill,
alertness, or fatigue. The system and equipment design must minimize flightcrew errors, which
could result in additional hazards.
PL.2605 Installation and operation.
(a) Each item of installed equipment related to the flightcrew interface must be labelled, if
applicable, as to it identification, function, or operating limitations, or any combination of these
factors.
(b) There must be a discernible means of providing system operating parameters required to
operate the aircraft, including warnings, cautions, and normal indications to the responsible
crewmember.
(c) Information concerning an unsafe system operating condition must be provided in a timely
manner to the crewmember responsible for taking corrective action. The information must be
clear enough to avoid likely crewmember errors.
A-24