Appendix A gives an acceptable means for certain powered-lift under §21.17(b). These criteria are not universally applicable CFR requirements; establish the basis for the particular aircraft.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
U.S. Department Advisory of Transportation
Federal Aviation Administration Circular
Subject: Type Certification—Powered-lift Date: 07/18/2025 AC No: 21.17-4
Initiated By: AIR-600
1 PURPOSE.
1.1 This advisory circular (AC) provides guidance for the type, production, and
airworthiness certification of powered-lift. This AC also designates the airworthiness
criteria in appendix A as an acceptable means, but not the only means, of showing
compliance with title 14 of the Code of Federal Regulations (14 CFR) 21.17(b) for
Federal Aviation Administration (FAA) type certification of certain powered-lift.
1.2 This is a guidance document. Its content is not legally binding in its own right and will
not be relied upon by the Department as a separate basis for affirmative enforcement
action or other administrative penalty. Conformity with the guidance document is
voluntary only. Nonconformity will not affect rights and obligations under existing
statutes and regulations.
2 RELATED MATERIAL.
2.1 Title 14, Code of Federal Regulations.
The full text of these regulations is available at https://www.ecfr.gov.
• Part 1, Definitions and Abbreviations.
• Part 21, Certification Procedures for Products and Articles.
• Part 23, Airworthiness Standards: Normal Category Airplanes.
• Part 25, Airworthiness Standards: Transport Category Airplanes.
• Part 27, Airworthiness Standards: Normal Category Rotorcraft.
• Part 29, Airworthiness Standards: Transport Category Rotorcraft.
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Begin with the aircraft and the agreed basis.
Connect the operating concept, aircraft-level failure effects, system architecture and assurance planning. Keep FAA powered-lift criteria and EASA SC-VTOL provisions distinct when developing the safety and certification approach.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.