FAA / Modern Part 23
For an Amendment 23-64 or later basis, §23.2510 sets the equipment and systems safety objectives. Select the applicable FAA-accepted means of compliance, including its revision and any FAA modifications.
Read §23.2510Aircraft / Safety / Certification
Conventional aircraft. Rotorcraft. eVTOL.
New ideas with real engineering questions.
We connect the certification basis, aircraft architecture and safety evidence. Explore the approach for your programme, with the relevant guidance close at hand.
Explore your programmeChoose your starting point
New or novel features can arise within any aircraft category.
Your programme / Part 23
Build the safety approach around the aircraft’s certification basis, its operating characteristics and the functions being introduced or changed.
FAA / Modern Part 23
For an Amendment 23-64 or later basis, §23.2510 sets the equipment and systems safety objectives. Select the applicable FAA-accepted means of compliance, including its revision and any FAA modifications.
Read §23.2510FAA / Earlier certification bases
Earlier projects may retain §23.1309. AC 23.1309-1E addresses amendments through 23-62. Establish the actual amendment and scope of a change before selecting that guidance.
AC 23.1309-1E · earlier amendmentsOur engineering approach
Consider aircraft level and performance, flight phase, operating environment, crew capability and the intended use of the affected functions.
Examine shared power, sensors, data, processors and interfaces, including interactions between flight controls, propulsion, displays and automation.
Connect failure conditions, architecture, independence and development assurance. Make the assumptions behind any allocation explicit.
For an altered aircraft, identify affected interfaces, operating assumptions, assessments and verification evidence, alongside the certification-basis review.
Read with the basis in view
Source texts and our explanations are kept separate.
Start a useful conversation
Bring the certification basis, the aircraft level and intended operation, the affected functions and any proposed changes to an existing design.
eVTOL / An illustrative safety question
A fictional example of how an aircraft-level question becomes design requirements and evidence. It assigns no failure classification or assurance level.
A fictional eVTOL has several lift units connected to one cooling circuit. If that circuit is lost during transition, determine which units are affected, how quickly their capability changes and what the aircraft can still do. Examine the relevant flight phases, conditions and crew response.
Map the cooling circuit, affected equipment, temperature sensing, power limits and protective responses. Determine whether one fault can degrade several lift units together. Define any separation, thermal endurance, monitoring, reconfiguration and response-time requirements needed to support the safety objectives.
Define representative thermal and integration tests, fault-insertion cases and aircraft-response evidence. Establish what each model or rig represents, its limits and the design configuration tested. Reconcile the results with the assessed loss of capability and close the assumptions before taking credit in the final assessment.
Across the programme
Our approach draws on ARP4761A and ARP4754B. We agree the methods, editions and extent of application against the programme’s certification basis.
Define aircraft and system functions, operating conditions, failure effects, classifications and assumptions.
Assess interactions, failure combinations and independence. Derive requirements and coordinate the assurance allocations.
Connect requirements validation, design verification, software and hardware assurance, supplier interfaces and configuration control.
Reconcile analysis and verification, close assumptions and carry safety-related operating and maintenance provisions into the final package.
These activities iterate as the design develops. The supporting FTA, FMEA/FMES, common-cause and dependency work follows the questions raised by the architecture.
Source editions checked on 16 November 2026. The selected regulations, guidance and publication records support the distinctions shown here; the engineering questions and work-product outlines are Aerospace Consulting’s explanations.
Confirm the certification basis, amendment levels, accepted means and current source status for each programme. FAA and EASA terminology, categories and safety objectives need their own applicability assessment.
Consulting support is agreed to suit the programme. Any delegated approval must be within the specific authority granted for that work, including any additional authorisation required for a special-class project.
FAA AC 20-174 recognises ARP4754A. EASA CM-DASA-002 and the final SC-VTOL MoC provide their own scoped treatment of later development-assurance guidance. Use the applicable authority position when agreeing editions.
CM-DASA-002 addresses aircraft and system development assurance and its interfaces with safety assessment. The safety assessment process itself and item-specific software and hardware assurance are outside its scope.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
aero@aerospace.consultingA focused review, an agreed compliance package or ongoing support alongside your team.
This opens your email application.
System safety support
Tell us about the aircraft or system, its stage of development and the safety question you need help answering.
aero@aerospace.consultingA focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
aero@aerospace.consultingCertification planning, a system safety review, or ongoing technical support for your team.
This opens your email application.
Experience & approach
Tell us about the aircraft or system, its development stage, your next milestone and the technical question you need to resolve.
aero@aerospace.consultingWe can then agree whether a focused review, a defined work package or ongoing support is the right starting point.
This opens your email application.
AI/ML assurance & certification readiness
Tell us what the AI will do, who will rely on its output, the aircraft or engineering process involved, and the next decision you need to make.
aero@aerospace.consultingWe can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.
aero@aerospace.consultingA focused engineering review or ongoing support with requirements, architecture and development assurance.
This opens your email application.
A technical conversation
Tell us about your aircraft or system, the reference you are using and the decision your team needs to make.
aero@aerospace.consultingWe can help connect the guidance to your safety, systems engineering or certification work.
This opens your email application.