Conventional aircraft. Rotorcraft. eVTOL. New ideas with real engineering questions.
We connect the certification basis, aircraft architecture and safety evidence. Explore the approach for your programme, with the relevant guidance close at hand.
New or novel features can arise within any aircraft category.
Your programme / New & novel
New and novel designs
New technology can appear in any aircraft category. Identify where a feature challenges the existing assumptions, requirements or means of compliance, then develop the evidence and authority position around that gap.
FAA / A conventional category basis
Where the applicable airworthiness standards do not adequately address a novel or unusual design feature, §21.16 provides for special conditions. Establish the affected requirements and the specific safety gap.
Under §21.17(b), unique or novel features are addressed through appropriate alternate or additional airworthiness criteria. AC 21.17-4 §§7.2–7.3 explains this process and excludes §21.16 special conditions from that special-class basis.
Describe the function, operating limits and novel feature. Identify gaps in failure experience, accepted methods, human roles, architecture or verification capability.
What could the feature affect beyond its own boundary?
Evaluate dependencies, cascading effects and interactions with existing protections. Include energy systems, automation and aircraft-wide services where relevant.
What must be agreed before the evidence programme grows?
Propose the criteria, objectives, means of compliance, responsibilities and limitations. Resolve the difficult authority questions early enough to influence the design.
What makes the new method credible?
Define validation, representativeness, uncertainty, coverage and independent review for new tools or models. For AI/ML, establish the use case and specific assurance needs.
Read with the basis in view
Useful regulations and guidance.
Source texts and our explanations are kept separate.
Bring a clear description of the novel feature, the proposed certification basis, assumptions that may no longer hold, and the questions already raised with the authority.
eVTOL / An illustrative safety question
Several lift units. One shared cooling circuit.
A fictional example of how an aircraft-level question becomes design requirements and evidence. It assigns no failure classification or assurance level.
Start with the available thrust and control.
A fictional eVTOL has several lift units connected to one cooling circuit. If that circuit is lost during transition, determine which units are affected, how quickly their capability changes and what the aircraft can still do. Examine the relevant flight phases, conditions and crew response.
Trace the shared dependency through the design.
Map the cooling circuit, affected equipment, temperature sensing, power limits and protective responses. Determine whether one fault can degrade several lift units together. Define any separation, thermal endurance, monitoring, reconfiguration and response-time requirements needed to support the safety objectives.
Show that the claimed response is achievable.
Define representative thermal and integration tests, fault-insertion cases and aircraft-response evidence. Establish what each model or rig represents, its limits and the design configuration tested. Reconcile the results with the assessed loss of capability and close the assumptions before taking credit in the final assessment.
Across the programme
Carry the safety argument through development.
Our approach draws on ARP4761A and ARP4754B. We agree the methods, editions and extent of application against the programme’s certification basis.
01 / Establish
Functions, effects and objectives
Define aircraft and system functions, operating conditions, failure effects, classifications and assumptions.
These activities iterate as the design develops. The supporting FTA, FMEA/FMES, common-cause and dependency work follows the questions raised by the architecture.
Source editions, applicability and the scope of our support
Source editions checked on 16 November 2026. The selected regulations, guidance and publication records support the distinctions shown here; the engineering questions and work-product outlines are Aerospace Consulting’s explanations.
Confirm the certification basis, amendment levels, accepted means and current source status for each programme. FAA and EASA terminology, categories and safety objectives need their own applicability assessment.
Consulting support is agreed to suit the programme. Any delegated approval must be within the specific authority granted for that work, including any additional authorisation required for a special-class project.
FAA AC 20-174 recognises ARP4754A. EASA CM-DASA-002 and the final SC-VTOL MoC provide their own scoped treatment of later development-assurance guidance. Use the applicable authority position when agreeing editions.
CM-DASA-002 addresses aircraft and system development assurance and its interfaces with safety assessment. The safety assessment process itself and item-specific software and hardware assurance are outside its scope.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Aircraft and system safety assessments
Flight controls, avionics and equipment
Certification planning and compliance evidence
FAA DER services within the applicable delegation
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Flight control and autoflight systems
Hazard assessments and architecture reviews
Avionics and systems integration
Certification and verification planning
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Aircraft and system safety assessments
Flight controls and actuation architecture
Development assurance and verification evidence
Certification planning and technical coordination
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.