This AC recognises DO-178C/ED-12C, DO-330/ED-215 and the model-based, object-oriented and formal-methods supplements. Apply the relevant provisions to the software and certification context.
The source, within reach.
Search within this AC, jump to a source page, or download the complete saved publication.
This extraction supports search. Read the original page for complete notation and layout.
7/21/17 AC 20-115D
you need to qualify the tool, use the software level assigned by the system safety assessment for
determining the required Tool Qualification Level (TQL), and use ED-215/DO-330 for the
applicable objectives, activities, and life cycle data. You may declare your qualified tool as
having satisfied ED-215/DO-330 but not the legacy software as equivalent to having satisfied
ED-12C/DO-178C.
b. If your legacy software was previously approved using ED-12B/DO-178B, and you do
not intend to declare equivalence to satisfying ED-12C/DO-178C, you can either:
(1) Use your ED-12B/DO-178B tool qualification processes for qualifying new or
modified tools in support of modifications to ED-12B/DO-178B legacy software, or
(2) Update your tool qualification processes and qualify the tool using ED 215/DO-330;
use Table 2 of this document for determining the required TQL. You may then declare your
qualified tool as having satisfied ED-215/DO-330.
c. If your legacy software was previously approved using ED-12B/DO-178B, you intend to
declare equivalence to satisfying ED-12C/DO-178C, and you have ED-12B/DO-178B legacy
tools that need to be qualified, follow the guidance of this subparagraph.
(1) ED-12C/DO-178C establishes five levels of tool qualification based on the tool use
and its potential impact in the software life cycle processes (see section 12.2.2 and Table 12-1 of
ED-12C/DO-178C). However, ED-12C/DO-178C does not address the use of tools previously
qualified to the ED-12B/DO-178B criteria. For a tool previously qualified as a ED-12B/DO-
178B development tool or verification tool, use Table 2 (below) to determine the correlation
between the ED-12B/DO-178B tool qualification type and ED-12C/DO-178C tool criteria and
tool qualification levels (TQLs).
Table 2 - Correlation Between ED-12B/DO-178B Tool Qualification Type and
ED-12C/DO-178C Tool Criteria and TQL
ED-12B/ ED-12C/ ED-12C/ED-215
Software
DO-178B Tool DO-178C DO-178C/DO-330
Level
Qualification Type Tool Criteria TQL
Development A 1 TQL-1
Development B 1 TQL-2
Development C 1 TQL-3
Development D 1 TQL-4
Verification A, B 2 TQL-4
Verification C, D 2 TQL-5
Verification All 3 TQL-5
(2) Development Tools Previously Qualified Using ED-12B/DO-178B.
11
Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.
Aerospace Consulting / Engineering perspective
Keep software assurance connected to the system.
Make the software level, allocated requirements, interface assumptions and verification responsibilities explicit. Plan the evidence and review points early, and trace changes back to the system safety and certification assumptions.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.