FAA / Advisory circular

AC 20-152A

Development Assurance for Airborne Electronic Hardware

Development assurance for custom airborne hardware, COTS devices, COTS IP and circuit board assemblies.

Start with the scope.

This AC recognises DO-254/ED-80 and adds objectives for distinct hardware categories. Its stated applicability covers hardware contributing to DAL A, B and C functions; the relevant objective restrictions still apply.

The source, within reach.

Search within this AC, jump to a source page, or download the complete saved publication.

Download saved FAA PDF ↓

Read the source

The document, within reach.

FAA source document

Printed page 25

PDF page 25 of 31

Enlarge original ↗

Original FAA page; extracted words support search. Text reflow has not been reviewed.

Original FAA AC 20-152A, PDF page 25
AC 20-152A · 25Open saved PDF here ↗
Extracted text for finding words

This extraction supports search. Read the original page for complete notation and layout.

10/7/22                                                 AC 20-152A

7.1      Applicability
         Section 7 is applicable to CBA that contribute to hardware DAL A, B, or C functions.

7.2     Development Assurance of Circuit Board Assemblies
        While it is already a common practice for applicants to have an internal process to
         address the development of CBA, it is necessary to clarify the expectations for
        development assurance, including the flow down of the equipment/system requirements
          to the hardware. For consolidation of the development and/or the use of complex
         devices, it is essential to ensure consistency in the overall development assurance
        approach for the hardware domain. Moreover, definition of the CBA function is also
         necessary to enable the allocation of requirements and their flow-down to the complex
         devices.

         Objective CBA-1
        The applicant should have a process to address the development of circuit board
         assemblies that contain complex custom devices or complex COTS devices, in order to
        ensure that the CBA performs its intended function. The process should include
         requirements capture, validation, verification, and configuration management
           activities, and ensure an appropriate flow down of requirements. See AC 00-72 for
         additional information.
        Note: The applicant’s process to address the development of the circuit board assembly
       may be defined together with the equipment process, when relevant.

8    RELATED REGULATORY, ADVISORY, AND INDUSTRY MATERIAL

8.1      Title 14 of the Code of Federal Regulations (14 CFR) Applicable Sections

        This AC provides guidance on development of an acceptable means of compliance to
         the following regulations, with respect to AEH development assurance: 14 CFR parts
         21, 23, 25, 27, 29, 33 and 35 (principally, §§ 21 subpart O, 23.2500, 23.2505, 23.2510,
        25/27/29.1301, 25/27/29.1309, 33.28, and 35.23).

8.2   FAA Advisory Circulars

        • AC 00-72, Best Practices for Airborne Electronic Hardware Design Assurance
           Using EUROCAE ED-80( ) and RTCA DO-254().

        • AC 20-174, Development of Civil Aircraft and Systems.

        • AC 21-50, Installation of TSOA Articles and LODA Appliances.

        • AC 23.1309-1, System Safety Analysis and Assessment for Part 23 Airplanes.

        • AC 23.2010-1, FAA Accepted Means of Compliance Process for 14 CFR Part 23.


                                         25

Saved from the FAA on November 17, 2026. All original pages are retained. Engineering explanations are presented separately below.

Aerospace Consulting / Engineering perspective

Define the hardware assurance approach by function and device.

Use the PHAC to identify intended functions, assurance levels, custom and COTS boundaries, and the evidence needed for each applicable objective. Keep supplier information, integration verification and system-level assumptions connected.

Discuss the system and hardware assurance approach →
Source edition and reading coverage

31 original pages. 0 pages have reviewed text reflows. Original-first pages retain the source layout, with extracted text available for finding words.

Source SHA-256: 06b17bec98562261063d87e518df3fe581412a5dce64b39ef4769c57433b6bc6

This is a dated source copy. Automatic source acquisition is not yet scheduled.

Original FAA PDF ↗

Working through a certification question?

Bring the aircraft, the basis and the issue your team needs to resolve.

Discuss your programme →