(a) Strength requirements are specified in terms of limit loads (the maximum loads to be expected in service) and ultimate loads (limit loads multiplied by prescribed factors of safety). Unless otherwise provided, prescr…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
Unless otherwise provided, a factor of safety of 1.5 must be used. This factor applies to external and inertia loads unless its application to the resulting internal stresses is more conservative.
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) The structure must be able to support limit loads without detrimental or permanent deformation. At any load up to limit loads, the deformation may not interfere with safe operation. (b) The structure must be able to…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) Compliance with the strength and deformation requirements of this subpart must be shown for each critical loading condition accounting for the environment to which the structure will be exposed in operation. Structur…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
The following values and limitations must be established to show compliance with the structural requirements of this subpart: (a) The design maximum weight. (b) The main rotor r.p.m. ranges power on and power off. (c)…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
(a) The flight load factor must be assumed to act normal to the longitudinal axis of the rotorcraft, and to be equal in magnitude and opposite in direction to the rotorcraft inertia load factor at the center of gravity.…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
The rotorcraft must be designed for— (a) A limit maneuvering load factor ranging from a positive limit of 3.5 to a negative limit of −1.0; or (b) Any positive limit maneuvering load factor not less than 2.0 and any neg…
Text as of November 12, 2026
OFR/GPO eCFR · Regulatory textDated regulatory text
The loads resulting from the application of limit maneuvering load factors are assumed to act at the center of each rotor hub and at each auxiliary lifting surface, and to act in directions, and with distributions of loa…
Text as of November 12, 2026
No matches in this collection.
Remove a filter, use fewer words or include historical and proposed publications. An empty result does not mean that the FAA has no relevant material.
1,177 section entries, 24 appendices and 3 SFAR entries as of November 12, 2026. Tables and 102 original graphics are included. Text inside graphics is not indexed.
Sections, appendices and included SFARs from Parts 21, 23, 25, 27 and 29 are searchable. Historical CFR editions are not included. Source tables and graphics are retained; text inside graphics is not indexed.
1,689 DRS catalogue records: 656 current and 1033 historical. 6 ACs have complete source copies and a separate search within each document.
Records returned by the FAA DRS AC feed, including current and historical editions. Other FAA collections may contain additional publications. AC PDF contents are not included in this collection search. Each hosted AC has its own full-document search. Your search is not sent to the FAA.
19 selected FAA, EASA and industry publication notes. This is not a complete EASA collection.
Reviewed notes and source links for FAA, EASA, SAE and EUROCAE publications. Proposed material and research are labelled. Licensed standards remain with their publishers.
This is an independent resource. The eCFR is an editorial compilation, not the official legal edition of the CFR. Dates, topic tags and source associations do not establish your programme’s certification basis. Confirm applicability and the required edition at the source.
Connect the reference to your programme.
Bring the aircraft or system, the applicable basis and the question your team needs to resolve.
Conventional Aircraft
Safety and certification support for fixed wing aircraft and the systems that make them work.
Aircraft and system safety assessments
Flight controls, avionics and equipment
Certification planning and compliance evidence
FAA DER services within the applicable delegation
Proposed sector introduction for review.
Rotorcraft
Connect rotorcraft safety, system architecture and certification evidence.
Flight control and autoflight systems
Hazard assessments and architecture reviews
Avionics and systems integration
Certification and verification planning
Proposed sector introduction for review.
eVTOL & advanced air mobility
Bring safety and certification thinking into emerging aircraft programmes from the outset.
Aircraft and system safety assessments
Flight controls and actuation architecture
Development assurance and verification evidence
Certification planning and technical coordination
Proposed sector introduction for review.
Certification & DER support
Tell us about the aircraft or system, the approval sought, its stage of development and the question you need to resolve.
A focused review, an agreed assessment package or ongoing support alongside your team. We can agree the relevant inputs and scope in the initial conversation.
This opens your email application.
Start a conversation
Tell us about your programme, the system you are developing and the support you need.
We can agree a focused use-case review, a defined evidence package or ongoing programme support.
This opens your email application.
Specialist aerospace expertise
Aerospace Consulting is led by Hussein Khimji, an FAA Designated Engineering Representative in systems and equipment, with a focus on system safety, flight controls and avionics.
We work with aircraft developers and systems suppliers to connect technical decisions, safety assessments and certification evidence.
This is the proposed introduction. The full About page will add your approved biography and associate expertise.
Systems engineering & development assurance
Tell us about the aircraft or system, its intended function, stage of development and the support you need.